Table of Contents
How do you load paper into an HP sprocket?
Slide the top cover. Remove the top cover. Load up to 10 sheets of HP Sprocket Photo Paper with the blue Smartsheet®. Align the top cover. Slide the top cover. Turn on the printer. Slide the top cover. Remove the top cover. Remove any loose photo paper from the input tray. Align the top cover. Slide the top cover.
Why does my sprocket keep saying its out of paper?
With HP Sprocket Plus Photo Paper loaded, the printer does not feed the photo paper and an Out of Paper error message displays on the HP sprocket app. The Status Indicator light blinks and turns red. Turn off the printer. Remove the paper cover by sliding it away from the output slot, and then set it aside.
Why is my Sprocket light red?
The Status Indicator light blinks red and a Low On Supplies message displays in the HP sprocket app. The cartridge is almost empty, and the paper is running low. Both need to be replaced soon.
Why is my HP sprocket not printing the picture?
The Sprocket might have turned off or the battery might need to be charged. Use the HP sprocket app to check the battery status, and then adjust the Auto Off setting. Press and hold the Power button to turn on the Sprocket, and then open the HP sprocket app.
Why does my HP sprocket keeps printing the same picture?
Upgrading the Sprocket firmware might resolve the issue. Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings. Look for a firmware upgrade. If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.
How do you clear a paper jam on an HP sprocket?
Turn on the Sprocket. Remove the Paper Cover, and then use a narrow object, such as a pen or paperclip, to press and hold the Reset button for 3 seconds until the Sprocket turns off. NOTE: The location of the Reset button varies by Sprocket model.
Why is my HP sprocket not turning on?
If the printer does not turn on when you press the Power button, reset the printer to clear any errors. Remove the paper cover. Locate the Reset button. With a paperclip or pin, press and hold the Reset button for 3 seconds.
How does HP sprocket 200 work?
HP Sprocket 200 Printers – Setting Up the Printer Step 1: Unbox and charge the printer. Unbox the printer, and then charge it before using it. Step 2: Pair the printer and mobile device. Step 3: Check for a firmware upgrade. Step 4: Load HP Sprocket Photo Paper. Step 5: Print a photo.
How do you know when the HP sprocket 200 is fully charged?
To charge fully, allow the device to charge until the Charge LED Indicator Light turns green. 5. Turn on the device by pressing the Power Button until the Status LED Indicator Light illuminates and turns solid white (default) or personalized color.
What does a solid red heartbeat LED light indicate on HP printer?
The heartbeat LED indicates whether or not the formatter is functioning correctly.
Can sprocket print while charging?
Printer can be used while charging. Fully charged Device is fully charged. Powering on/Receiving print job LED flashes white when powering on and when receiving a print job.
What does solid red light mean?
Red. A steady RED traffic light means come to a full stop. You must wait until the traffic light turns green and there is no crossing traffic before you may go. If it is safe to do so, you can turn right on red if there is no sign prohibiting it.
Why is my HP sprocket app not working?
Restart Your Sprocket & Phone By restarting your phone and your Sprocket, you may be able to shake your connection problem. Locate the reset button on your Sprocket (a small button that you will need a paper clip to press) and press the button until your Sprocket turns off.
Why is my Sprocket printing bad quality?
Dirt and debris on the paper path rollers can cause print quality issues. Use the colored Print Quality Card (formerly the Smartsheet) from the same pack of HP ZINK photo paper currently loaded in the Sprocket to clean the paper path rollers.
How can I make my HP Sprocket print better?
The following tips might help improve print quality. Make sure the lighting is sufficient to clearly see the subject of your photo. Use the HP sprocket app Autofix feature. Use the HP sprocket app to adjust photo contrast and brightness. Allow the Sprocket a few minutes to cool down between print jobs.
Does HP Sprocket run out of ink?
The Sprocket is rechargeable through a Micro USB, connects to your phone through Bluetooth, and requires Zink / HP photo paper to work. That means you don’t need ink because Zink’s proprietary printing technology puts crystals on every sheet that show up as specific colors when they’re heated up.
Why is my sprocket printing blanks?
Try updating the Sprocket Firmware Make sure the printer is charged 50% or more. Make sure the printer is on and your mobile device is connected to the Internet. On your mobile device, open the HP sprocket app. Tap the Menu icon , and then tap sprocket.
How do you turn on a sprocket?
Step 3: Confirm mobile device settings Turn on the Sprocket. On your mobile device, open the Bluetooth settings menu, and then make sure Bluetooth is enabled. Check the settings on your Android or iOS device. On your mobile device, open the HP sprocket app. Tap the Menu icon , tap sprocket, and then tap Manage Printers.
How long does it take for HP sprocket to print?
Printing took about 30 seconds per photo, and the printer lasted about an hour on a full battery. One note: We were unable to print while the Sprocket was charging, which is important to keep in mind if you’re using the printer at an event or party.
How do I know if my sprocket 2-in-1 is charged?
Connect the Micro-USB Cable to a power source. 3. When connected, the device will automatically power on and the Status Indicator LED Lights will turn red to indicate charging.
How do I turn off my HP Sprocket 2-in-1?
Slide the paper cover Gently insert a straight pin into the reset button access point, and then press the Reset button for 3 seconds. The Sprocket resets and turns off.
What is a Sprocket camera?
The HP Sprocket 2-in-1 offers the perfect way to capture memories with your friends at weddings, vacations, spontaneous trips – anywhere, really. Enjoy the power of a portable photo lab to instantly snap and print. The design allows you to take photos directly and print them instantly.
How do you know which way to put the paper in the printer?
Put the side to be printed on face up with the leading edge (top) of the paper in first. To print on the second side, put the paper face down, with the leading edge (top) of the paper in first. If letterhead paper is used, put it in with the heading face down and in first.
