Table of Contents
Which side of blackout lining faces the window?
While the lining will keep the light out of the room regardless of how it is positioned, some manufacturers recommend aligning it so the textile side faces the window, simply to reduce sun exposure to the specialty coating and to help prevent it from damage from rubbing against the window frame while the curtains are.
Which is the right side of blackout curtain lining?
Feel the surface of blackout or dimout lining; one side will feel smooth, and one will feel rougher. The rough side is the right side, and it should orient to the road. (“Rough to the Road”).
Do you need to hem blackout lining?
If You’re Using The Blackout Fabric As A Curtain Lining With Blackout fabric linings the hems should be as short as possible 1-2cm on all four sides, this will enable the curtains and the blackout lining to work much better at blocking out the light.
Are blackout curtains black on one side?
Blackout fabric isn’t black. Both sides of the fabric are white. One side has a finish and the other side doesn’t. The finish is sewn to the outside, which means the finish will be closest to the window when the drapery is hung.
Which side of curtains should be inside on door?
But the fabric side (also described as the woven or rough side) is made to face the window because of the durability. Face the fabric side out to avoid yellowing or sun damage, which will preserve the lifespan of your curtains.
Should I iron curtains before hanging?
Start by steaming or ironing your draperies to remove any creases. If in doubt, lay a clean towel over your drapery fabric and iron over the towel on low. However, just ironing your curtains will cause your drapes to spread out at the bottom rather than hanging uniformly along with the built-in pleats.
What is the correct way to put curtains?
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
How do you sew a blackout liner?
Step 1: Cut and Lay Out Fabric. pinning fabric for blackout shade. Step 2: Sew Sides. sewing blackout fabric to curtain panel. Step 3: Iron Seams. ironing edges of blackout curtain. Step 4: Make Rod Casing. measuring and marking fabric. Step 5: Hem and Finish. finished blackout curtains with chair.
Can you hem blackout curtains?
One of the easiest ways to join your blackout lining to your curtains is with the help of something called fusible hemming web. This can be used for joining two fabrics together. Simply place the hemming web tape between the two fabrics and then using a standard iron press together until they are bonded.
What is the difference between lined and blackout curtains?
Blackout curtain lining is usually sewn to the back of the curtain instead of a regular lining. If your curtains are already lined then a blackout lining can be hung behind the existing curtains if the track or pole can take the weight of both.
Can you cut blackout curtains?
But blackout lining won’t fray so it’s great fabric to just cut and sew into place.
Does thermal lining for curtains work?
Does thermal lining for curtains work? It certainly does! Thermal lining improves the R-value (the rating of insulation) while reducing the U-value (thermal transmittance).
How long should blackout curtains be?
It’s ideal to extend about 4 inches up onto the window frame to keep the light out. Depending on the overall look you’re going for, they could extend higher, about 6 to 12 inches above the window frame. Curtains can be hung as high as 20 inches above the window frame to create an elongated appearance.
Do sheer curtains go in front or behind?
When the sheer curtain is the top layer, they’ll hang over your blackout curtains. This lends a visually interesting look for your windows, especially if the two fabrics are paired well based on their pattern and palettes. Sheers are always visible being the top layer.
How far should curtains be off the floor?
The proper position is ½ inch above the floor for free hanging curtains. This distance allows for mopping and cleaning while creating the illusion that the curtain touches the floor.
Should new curtains be washed before hanging?
New curtains can be stiff and may have a strong starch smell. Washing new curtains before hanging can help them hang better, can get rid of odor, and can help your new curtains look more vibrant. Washing them before hanging is an excellent idea.
How do you iron curtains while they are hanging?
If you choose to iron your curtains, use a steam iron (on a low setting) directly on the wrinkled portions while curtains hang. Curtains requiring more intense ironing should be placed on an ironing board with a cloth placed over them to steam iron, flat, on a higher setting.
