Table of Contents
If you have a gas furnace, here are the steps on how to light a pilot light. First, locate the pilot valve on the furnace. Find the gas valve and turn it to the “off” position. Turn the valve to the “pilot” position. Press and hold the reset button. If the reset button fails, ignite the lighter.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
How do you light a pilot light on a gas furnace?
What causes a pilot light to go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don’t hesitate to contact a professional.
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
How do I turn my gas back on after disconnecting?
You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.
Does gas still flow when pilot light goes out?
If your pilot light repeatedly goes out, this is a likely culprit. If this flame sensor should fail, gas will continue to flow even after the pilot light has been extinguished, causing a safety hazard, and requiring immediate repair.
Why is my pilot light not staying lit on my furnace?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
Why won’t my pilot light light on my furnace?
There are several possible reasons why your gas furnace pilot won’t light: an ongoing draft, a faulty thermocouple, an accumulation of dirt, or an inefficient supply.
What happens when furnace pilot light goes out?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
How do you fix a gas fire that keeps going out?
Easy DIY Fix: Gas Fireplace Won’t Stay Lit Before You Begin: Is Your Pilot Light Lit Inside Fireplace? The Fix: Pilot Light to Gas Fireplace Won’t Stay Lit. Check Your Thermopile Output with the TH/TP Contacts. Don’t Replace Your Thermopile or Thermocouple Right Away. Cleaning the Thermopile. Re-test the Cleaned Thermopile.
Why does pilot light go out on hot water tank?
Your thermocouple senses when your pilot light is burning. If it senses that your water heater pilot light keeps going out, the thermocouple will shift off the gas supply to the heater. Over time, thermocouples can malfunction, accumulate dust buildup, or the device can get bent away from the pilot light’s flame.
Can you manually light a gas hot water heater?
Lighting a water heater is simple, no matter what type you have. Most newer models of gas water heaters have a simple ignition switch. In just a few steps the water heater is lit, no problem. If you’ve moved into an older house, though, you many have the kind of water heater that needs to be lit manually.
Does the gas company light pilot lights?
PG&E gas service professionals relight appliance pilots at no extra cost. “We want every family that we serve to be safe and warm this winter,” said Laurie Giammona, PG&E’s chief customer officer.
Should the pilot light always be on in a gas furnace?
Most furnaces with electronic ignition have a device called a hot surface igniter. The difference is that the flame is only lit (by an electronic spark) when your furnace is ready for a heating cycle. When the pilot light is not needed, it is completely off, saving you money on gas.
How do I know if my gas is shut off?
A) located just before the gas meter. This valve, often called the street-side valve, is normally a rectangular nub (Photo 1). When the long side of the nub or handle is parallel to the incoming gas line, it’s open and the gas is flowing. When it’s turned a quarter turn, perpendicular to the incoming pipe, it’s closed.
How long does it take to turn gas on?
It typically takes one week for natural gas providers to process your request to start or stop service. As a result, you’ll want to transfer service at least one week ahead of time.
What happens if you cut the lock off your gas meter?
Removing a gas lock without the utility company’s permission may result in theft or vandalism charges, punishable by fines and imprisonment of around a year, depending on the jurisdiction.
Is it safe to light a pilot light?
Is relighting a pilot light dangerous? Relighting a pilot light is potentially dangerous. If the flame blows out, the gas won’t stop coming in the pilot light tube and will continue to escape without igniting. As it continues to collect in your room, lighting it could set off an explosion.
Can a pilot light cause a fire?
When the appliance is turned on, a valve releases more gas, which is ignited by the pilot light. If this leak continues, its concentration may reach a point where a spark – such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit – will cause a fire or even an explosion.
Why won’t my pilot light light on my gas fireplace?
Check Your Igniter and Thermocouple If nothing is blocking the tubing, and gas is flowing out, there might be something wrong with the spark igniter and thermocouple. Make sure there’s no debris lodged between the two. If the pilot light ignites but doesn’t stay lit, you might need to replace the igniter.
