Table of Contents
Turn the water heat dial to Low and the On/Off/Pilot dial to Pilot. Then, turn the On/Off/Pilot dial downwards and push the igniter button at the same time. Let go of the igniter button, but keep pressing the Pilot dial downward for around 30 seconds. You should hear a “whoosh” sound when the gas is lit.
How do you light a water heater?
How to Light a Water Heater Pilot Light Open the door/cover over the pilot light access. Use a flashlight or a headlamp to find the burner inside. Turn the gas knob to “Pilot,” press and hold it down. While still holding the gas down, light that pilot.
How do I know if my water heater is gas or electric?
Start by looking for an access panel on the side of the water heater. If you remove it and see a blue flame, that’s a pilot light, which only gas models have. Connected pipes are also indicators of gas, while an electric water heater will simply have a cord going into the top or side of the unit.
Do all gas water heaters have a pilot light?
* Caution: Most modern water heaters no longer use standing pilots. They use electronic ignition to ignite the gas. Do not attempt to manually light an electronic ignition system.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
Can you manually light a gas water heater?
Lighting a water heater is simple, no matter what type you have. Most newer models of gas water heaters have a simple ignition switch. In just a few steps the water heater is lit, no problem. If you’ve moved into an older house, though, you many have the kind of water heater that needs to be lit manually.
How do you turn on a pilot light?
Turn the gas regulator valve to the “pilot” position. If the water heater has a manual “ignite” button, press that to light the pilot. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites.
How do I turn on my hot water?
How to turn on modern gas instantaneous hot water system Step 1 – Turn off power point at water heater position. Step 2 – Turn off the gas. Step 3 – Turn on the taps. Step 4 – Turn on the power supply and gas valve. Step 5 – Set the temperature.
How do I check my pilot light?
How to Tell If the Pilot Light Is Out Locate the front cover panel on your furnace. It should be a little door that’s easily visible. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color.
Should the water heater be on pilot or on?
You should set the water heater to “pilot”. If, however, your water heater is also the boiler for your central heating, then you’ll want to leave the heating running as normal so that your house doesn’t get damp as a result of cold and condensation.
How do I turn on my electric water heater?
Electric water heaters don’t have a pilot, so the process is simple. First, make sure the breaker that controls the water heater is switched off. Check for any open valves or faucets and close them. Then, turn on the cold water to let the hot water tank fill.
Why is my electric water heater not heating?
If an electric water heater is not producing hot water, it could be a simple problem like a blown fuse or tripped circuit breaker. Other simple solutions include an unplugged or faulty power cord for electric water heaters. For gas water heaters, it could be as straightforward as being out of gas.
Is there a pilot light on an electric water heater?
There’s no gas or pilot light involved in electric water heaters. If the power to your electric water heater is off, you may have an electrical issue requiring professional assistance. You will not need to reignite the water heater if you have a newer model equipped with an automatic pilot light.
How do I know if my water heater is working?
7 Tell-tale signs of a Water Heater not working You don’t have enough hot water. You have varying water temperature issues. You have a leaking water heater. You notice reduced water flow. You’re hearing some concerning sounds. You have smelly or discolored water. Your water heater is on the older end of the spectrum.
What does the pilot light look like?
A proper pilot flame should be blue with a yellow tip and should be strong enough to cover about 1/2 inch at the end of the thermocouple tip. If the flame is too strong and improperly adjusted, it will be blue but may be noisy and lift off the thermocouple, causing improper furnace operation.
What do I do if my pilot light won’t light?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
