Table of Contents
How to Light a Furnace Pilot Light First, locate the pilot valve on the furnace. Find the gas valve and turn it to the “off” position. Turn the valve to the “pilot” position. Press and hold the reset button. If the reset button fails, ignite the lighter.
Can you manually light a gas furnace with electronic ignition?
If your furnace is equipped with an electronic igniter, you cannot light the furnace manually. However, you may be able to get the furnace working by turning off the igniter and resetting it. Find the paperwork for your particular furnace to locate the reset button or switch.
How do I light the pilot on my electric ignition furnace?
How to Relight a Pilot Light: 5 Steps Find the pilot light assembly and its reset switch. The furnace’s pilot light is usually positioned at the bottom of the unit by a knob. Set the reset switch to off. Turn the knob to the “Off” setting. Wait a moment. Relight the pilot light. Observe the furnace.
How do you relight an automatic pilot light?
Press the gas control knob down all the way and hold it in the depressed position. If you have no igniter, move the match or barbecue lighter flame to the end of the pilot tube; the pilot flame should light immediately. If you have a spark igniter, press the ignition button until the pilot flame ignites.
How does an electric pilot light work?
A pilot light is a small flame that is kept lit in certain gas-fired appliances like your furnace, water heater, and gas fireplace. When you turn on your appliance, gas is released to the main burner and the pilot light ignites that gas to turn on your appliance and provide heat.
Does an electric furnace have a pilot light?
Electric furnaces have pilot lights, the same as gas furnaces. The trend of replacing pilot lights with electronic ignition systems in electric furnaces was similar to the one happening in gas furnaces. That means that before about 2010, most of the electric furnaces with pilot lights were produced.
How can I tell if my furnace is gas or electric?
If you see a blue flame, it’s a gas heat exchanger. Other units will have a small metal panel that’s easy to remove. You can check behind there to see if you see that blue flame. Electric systems don’t have that access window or panel and make very little noise.
How do I turn on my electric furnace?
There is a smaller red button next to the ignition button on most electric ignition furnaces. Check your owner’s manual for specific instructions if you’re not able to locate this. As you press the button for the electric ignition, press on this small button.
Why is my pilot light not staying lit on my furnace?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
How do you reset the pilot light on a furnace?
Turn the knob to “Pilot” and hold down the “Reset” button. Using a long lighter, bring the flame close to the pilot opening. This should ignite the pilot light. Once the pilot is lit, you can release the reset button. The pilot should stay lit at this point.
How do you turn on a pilot light?
Turn the gas regulator valve to the “pilot” position. If the water heater has a manual “ignite” button, press that to light the pilot. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites.
Is there a flame in an electric furnace?
Electric furnaces work differently from gas and propane furnaces. They do not have a flame sensor as they don’t use a flame to heat your home. Electric furnaces work similarly to a heat gun for a simple visual. They operate by using an electric motor to run a fan, which pulls air through the furnace and into your home.
Where is reset button on electric furnace?
Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.
Does electric furnace have flame?
“The flame’s main job is to heat the coils inside the furnace in order to warm the air. There is only an open flame in a gas furnace, electric furnaces do not have one.”Jul 28, 2016.
How do I know if my furnace is electric?
The easiest way to tell if you have a gas or electric furnace is to simply look at the make and model number of the furnace. While gas furnaces may be cheaper to operate, they may have a slightly shorter lifespan than electric units.
Where is the pilot light on my furnace?
Near the bottom of your furnace is a switch that normally says “Pilot,” “On” and “Off.” Find this switch and turn it to the “Off” position. Wait at least five minutes. This is important because it gives the gas time to dissipate, which is necessary to avoid possibly starting a fire.
