Table of Contents
How do you lift a hot tub by yourself?
How do you jack up a hot tub?
To lift the spa, position the jack under the ledge and pump the handle until the spa is lifted just enough to slide your cover lifter plates under. You can always place a some pieces of 2×4 wood as shims between the jack and the ledge for extra height if you need to.
How heavy is an empty hot tub?
How much does a hot tub weigh? There is no single standard hot tub weight. In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.
How do you lift a hot tub on its side?
If any spaces look difficult to fit through, you may need to turn the hot tub on its side. To do this, at least one person at each corner of the hot tub should lift it off the ground and rotate it, so that it is lying on one of its sides. Once you’ve done that, it will be easier to maneuver.
How easy is it to move a hot tub?
Spas can be quite large and awkwardly shaped. But properly prepared hot tubs are easier to move than you might think. Although enlisting friends to help is not the best way to move a hot tub safely, and moving a hot tub on your own could be expensive and void any existing warranty (more on that below), it is possible.
What Dolly will move a hot tub?
Here are the moving supplies you will need in order to safely and properly move the hot tub. Dolly (four-wheeled furniture dollies work best on flat surfaces while appliance dollies are recommended for stairs) Hand-truck. Moving blankets.
How many people can lift a hot tub?
There’s no doubt about it: moving a hot tub requires some serious muscle. That means you’re going to need at least three additional people to help with the move. If you can, I recommend recruiting up to six people to assist with the heavy lifting. Ask friends and family as far ahead of time as possible.
Is it safe to transport a hot tub on its side?
You often need to turn the hot tub on its side to maneuver it through tight spaces and to place it on the trailer for transport. Doing so is perfectly safe if you are careful and take necessary precautions before and during the move.
How do you lift a hot tub over a fence?
If we just need to lift the hot tub over a fence or bush/trees and can park a vehicle on the other side, then a HIAB crane may be just the trick. This is a truck with a small crane on the back, and can be considerably more cost effective than a full size crane.
What is the average weight of a 4 person hot tub?
4-Person Hot Tubs A four-person hot tub is usually considered medium-sized. Its empty weight will typically be around 750-800 lbs, while it can weigh around 3,700 when filled. Though these can range in size depending on their design, an average measurement for a four-person hot tub is 7′ x 7′.
What does a 5 person hot tub weigh?
Hot Tub Dimensions Length Average Empty Weight Small 5’5”-7′ 300-500 lb. Midsize 6’6”-7’10” 600-700 lb. Large 7′-9′ 800-1000 lb.
Can you put a hot tub on a wooden deck?
A hot tub on a deck is entirely possible, and it is possible your deck is already equipped to handle one. A deck designed to hold at least 100 pounds per square foot will support nearly any type of hot tub.
How do you move a hot tub with few feet?
Another common trick, particularly for those just looking to move their hot tub a few feet, is to leverage some PVC pipes under the hot tub unit. This makes it so you can roll the hot tub into position. Just take out one pipe and replace it under the unit as you roll it into place.
Can you move a hot tub with a pallet jack?
Professional movers usually use pallets for moving a hot tub, but you can also move it using plywood or 2×4 pieces of lumber. The goal is to lift the hot tub a few inches off the ground and provide a smooth surface so the pallet jack can slide under and lift your hot tub without damaging it.
How do you transport a spa?
Moving a Spa Step 1: Prepare Your Supplies. Step 2: Get Your Moving Truck Ready. Step 3: Assistance is Vital. Step 4: Check Your Environment. Step 5: Disconnect Your Spa. Step 6: Drain Your Spa. Step 7: Find the Route With the Least Obstacles. Step 8: Place Wood Pieces and Dollies Under Spa.
Can you use a chainsaw to cut up a hot tub?
Some people might recommend a chainsaw to cut up a hot tub, but a chainsaw isn’t a good choice of tool for this job. The chainsaw blade will end up getting chewed up.
How do you get a hot tub down stairs?
To go up, pull the appliance dolly so the handle side goes up the stairwell first. When going down, the side of the dolly with the hot tub should go down the stairwell first. Take it 1 step at a time, and make sure everyone is ready for the next step before moving.
