Table of Contents
Place stakes or sticks at areas that slope or are off-grade. You’ll need to dig away these area in order to create level ground for the pool. Dig away soil instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work.
Can you put a pool in a sloped yard?
The short answer is yes. By working with professional pool builders and landscapers, you can pursue pool installation even when you’re dealing with a slope. You can use the retaining walls to ensure runoff won’t end up in the pool or even create water features or ledges for sitting and entertaining.
How do you level an above ground pool with slope?
In order to install an above ground pool on a slope, dig down to create a flattened, level area. Using a level, mark all the high spots in the yard with stakes. Start digging on the high side until the hole is roughly level. Using a rake and a tamper, flatten masonry sand until area is level.
What is the easiest way to level a ground for a pool?
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
How do I prepare my above ground pool for a sloped yard?
Dig out the pool site so the soil is level with the lowest spot. Lay a straight board across the site and measure with a carpenter’s level. Do not fill in low spots as the weight of the water will compact the fill dirt, making it low again. Rake the area for final leveling.
Can you install an above ground pool on a slope?
If you have a hill or sloping backyard, the only way it’s possible to have an above ground pool is to have one specifically designed to be a semi-inground pool. Semi-Inground pools in the most basic description are above ground pools that can withstand the pressure of being buried.
Will an unlevel pool collapse?
Major Issues with an Unlevel Pool The pool will twist, buckle, or even collapse, causing property damage and injury to anyone in or around the pool. Even the most well-constructed pool can fail if the leveling is off.
Does it cost more to build a pool on a slope?
This will generally increase the overall cost. On average, pool owners who need a retaining wall will spend $7,000–$20,000 on it. On the other hand, if you decide to adjust the patio and fill dirt on a slight slope instead of building a whole wall, that costs $1,000–$4,000.
How do I level my ground for a pool without sand?
Pivot the plank around the pool area and level continually until you are pivoting 360 degrees without stopping. Next, you can spread a layer of crushed limestone over the pool area and seal it by wetting, tamping, and leveling it with your base. Now you can add your soil and limestone until it is flush.
Can you put an above-ground pool on unlevel ground?
If you install an above-ground pool on an uneven surface, the walls can collapse due to uneven pressure. This uneven weight distribution can buckle, twist or even collapse the pool wall, resulting in property damage and injury to anyone in or around the pool when it fails.
Can you use sand to level a pool?
Ask for enough to create at least a 2-inch thick layer of sand across the entire area of your pool site, though if you end up with 6-inches or more this is totally fine. Once it’s been delivered, use a rake to spread the sand evenly, then give everything a good water, and leave it to dry.
What to put under a pool to level it?
The most common materials to use as a base for above ground pools include concrete pads, commercial pads, sand, solid foam, carpet padding, and flooring underlayment.
What should I put under my above ground pool to level?
Concrete is probably the best option since it is usually 100% level and smooth. Also, grass can’t grow through concrete and animals and bugs can’t damage or burrow through it either. Grass or dirt is also another great option, as long as it has been properly leveled and you’ve killed off the grass first.
What tool do you use to level dirt?
A flat-edged spade performs the same task, but makes a straighter cut around the edge of the area that you are leveling. Once the soil is loose and workable, the tined side of a bow rake clears the area of small rocks and debris, while you can use the flat side to smooth the surface.
How do you set up an Intex ground pool uneven?
To set up your Intex pool on uneven ground, Start by outlining your pool on the floor. Use a stake and place it at the center of the place then tie a string to it. Measure the string to the radius of the pool and add 1 foot to the measurement.
How do you backfill an above ground pool with a slope?
Fill in the gap between the pool walls and the top of the slope with contractor grade backfill dirt. Do not use gravel or sand, to avoid damaging the pool walls. Add dirt to reach the level of the top of the slope and give the backfill a few days to settle before topping it off.
