Table of Contents
STEP 1: Determine your location and remove any large rocks or debris. STEP 2: Place 2x4s on the site and place a level on top. STEP 3: Add or take away soil until the ground is level. STEP 4: Repeat the process until the entire area is flat. STEP 5: Rake any remaining rocks or debris and tamp the ground.
What should I put under my above ground pool to level?
Concrete is probably the best option since it is usually 100% level and smooth. Also, grass can’t grow through concrete and animals and bugs can’t damage or burrow through it either. Grass or dirt is also another great option, as long as it has been properly leveled and you’ve killed off the grass first.
How do I level my ground for a pool without sand?
Pivot the plank around the pool area and level continually until you are pivoting 360 degrees without stopping. Next, you can spread a layer of crushed limestone over the pool area and seal it by wetting, tamping, and leveling it with your base. Now you can add your soil and limestone until it is flush.
How many bags of sand do I need for a 15 foot pool?
How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Amount for Sand Base with FOAM COVE 12′ Round 1.00 0.75 15′ Round 1.50 1.00 18′ Round 2.00 1.50 21′ Round 2.50 2.00.
How do you set up an Intex ground pool uneven?
To set up your Intex pool on uneven ground, Start by outlining your pool on the floor. Use a stake and place it at the center of the place then tie a string to it. Measure the string to the radius of the pool and add 1 foot to the measurement.
What should I use to level ground?
Outline your plot with stakes and string to create a boundary for the cultivation. Hammer stakes into the ground at each corner of the area to be cultivated. Dig up the soil. Start at one corner of your plot and insert the shovel about halfway into the soil. Hoe the area. Rake the area to further level the ground.
How many inches can an above ground pool be unlevel?
Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.
Can I put a pool on uneven ground?
Installing a pool on uneven ground creates a safety hazard. The uneven water level can also create problems for your skimmer and other cleaning equipment if they get stuck in the wrongly created “shallow end” you’ve managed to construct in your swimming pool.
Should I put pavers under pool legs?
It is best to put a 1ft-by-1ft concrete block paver under each leg of your above ground pool. These blocks can take the pressure and they don’t get mold, insects, or other forms of deterioration issues. By properly supporting the pool legs, you won’t damage the legs over time and have to dig them out to remove later.
Can you put plywood under above ground pool?
Plywood can serve as a level foundation for a swimming pool.
How do I prepare my yard for an above ground pool?
How to Prep Ground for an Above-Ground Pool Choose the best area of your yard to set up your pool. Mark the perimeter of the pool area. Remove all sod and other vegetation from the area. Determine the lowest point of the pool area. Create a wood level.
Can you partially bury an above ground pool?
The walls of an above ground pool typically consist of a thin aluminum wall that holds the pool liner. You will generally find above ground pool retailers willing to partially bury an above ground pool, but you can expect to leave at least half of the pool out of the ground.
How do I know if my ground is level?
Measure a distance 100 feet away from your house and drive another 3-foot-long stake 1 foot into the ground. Attach a string at ground level on the stake near the house, run the string out to the other stake, and attach it there so that the string is level.
How do you flatten an uneven ground?
This method is called the patch up because most of the lawn or garden is still ok. Step 1: Remove any high points or hard lumps. Step 2: Add and level top soil. Step 3: Seed the area. Step 1: Remove rocks, weeds or debris. Step 2: Use a rotavator to churn up the soil. Step 3: Add or remove enough soil.
How do you level out dirt?
Use these 8 steps for how to level a yard to ensure great results. STEP 1: Mow Your Lawn. STEP 2: Dethatch Your Lawn [As Needed] STEP 3: Dig up the grass in the sunken area of the lawn. STEP 4: Make Soil Mix: Topsoil, Sand and Compost. STEP 5: Fill Sunken Areas and Holes with Soil Mixture. STEP 6: Even Out the Entire Lawn.
What sand is best for leveling a pool?
Mason Sand, For Your Pool’s Base It is very fine and should not contain any rocks or pebbles. This will create a very smooth bottom and is the most popular method to use when installing an above ground pool.
Do you need sand for above ground pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
How much sand do I need to level a 18ft pool?
For a rectangular pool that’s 18 feet long by 9 feet wide, you’d need at least 1 cubic yard of sand for your base.
