Table of Contents
Leveling The Ground (Step-by-Step) Step 1: Find The Right Location. Step 2: Clear The Site. Step 3: Create Your Leveling Device. Step 4: Fix The Bumps And Holes. Step 5: Smooth It Out With Sand. Step 6: Compact The Sand Down Hard. Step 7: Lay Your Base Protector Down. Step 8: It’s Time To Start Setting Up Your Pool.
Can you level an above ground pool with sand?
The sand is simply a buffer from the pool liner to the ground. The purpose of the sand is not to level your pool. If you are using sand to level things out you will have nothing but problems. First the sand should be compacted with a plate compactor, and then hand troweled to a smooth finish.
How many bags of sand do I need to level my pool?
How Much Sand Will I Need For Pool Installation? Amount for Sand Base with SAND COVE Pool Size Yards of Sand Tons of Sand 12′ Round 1.00 1.40 15′ Round 1.50 2.00 18′ Round 2.00 3.00.
What can you put under pool to level?
Before deciding on what to put under your above ground pool, you need to decide on where to put your Intex pool. Popular options are grass, concrete, pavers, gravel, dirt and on decks. Concrete is probably the best option since it is usually 100% level and smooth.
What tool do you use to level dirt?
A flat-edged spade performs the same task, but makes a straighter cut around the edge of the area that you are leveling. Once the soil is loose and workable, the tined side of a bow rake clears the area of small rocks and debris, while you can use the flat side to smooth the surface.
How many inches can an above ground pool be unlevel?
Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.
How do you Relevel an above ground pool?
Drain some water. You are going to be lifting the lower side of the pool, so you need to get rid of some of the weight. Remove blocks. When you installed the pool, you put leveling blocks under the slab. Raise the wall. Replace blocks. Repeat. Fill the hole. Refill the pool.
Do you put sand under pool?
Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.
How do you level a sloped yard for a pool?
Place stakes or sticks at areas that slope or are off-grade. You’ll need to dig away these area in order to create level ground for the pool. Dig away soil instead of building up low patches. Always dig away slopes and high spots to make them level with lower areas, even if it takes more work.
What happens if ground is not level for pool?
What happens if an above ground pool is not level, though? If an above ground pool is not level, the water’s weight can cause damage to the walls and liner. As a result, your pool will collapse, potentially causing property damage or personal injury.
How much sand should I put under my above ground pool?
It is commonly recommended by above ground pool manufacturers to have a 2″ sand base inside the pool, under the liner. This will help protect your liner, and provide a soft floor that provides comfort while walking in your pool. Always use masonry sand, which is a washed sand, free of rocks and debris.
How much sand do I need for a 18 foot pool?
For a rectangular pool that’s 18 feet long by 9 feet wide, you’d need at least 1 cubic yard of sand for your base.
How many square feet does a 50 lb bag of sand cover?
Regarding this, “50 lb bag of sand cover how much area?”, generally a typical 50 lb bag of sand yields 0.5 cubic feet that will cover 3 square feet area for standard 2 inch depth for excavation and backfills, for 1 inch depth, it will cover 6 square feet, for 3 inch depth, it will cover 2 square feet and for 4 inch.
Should I put pavers under pool legs?
It is best to put a 1ft-by-1ft concrete block paver under each leg of your above ground pool. These blocks can take the pressure and they don’t get mold, insects, or other forms of deterioration issues. By properly supporting the pool legs, you won’t damage the legs over time and have to dig them out to remove later.
Can you partially bury an above ground pool?
The walls of an above ground pool typically consist of a thin aluminum wall that holds the pool liner. You will generally find above ground pool retailers willing to partially bury an above ground pool, but you can expect to leave at least half of the pool out of the ground.
How do I level my ground for a pool without sand?
Pivot the plank around the pool area and level continually until you are pivoting 360 degrees without stopping. Next, you can spread a layer of crushed limestone over the pool area and seal it by wetting, tamping, and leveling it with your base. Now you can add your soil and limestone until it is flush.
