Table of Contents
Add 3 to 4 inches above the length you need. Remove the slats from the cording above the length you need so you can tie the slats and cords of the bottom of the existing shade to the top of the new portion. Tie each thread and cord to its counterpart and add a drop of glue on each knot. Trim off the excess thread ends.
What to do when your blinds are too short?
Mounting Window Blinds That Are Too Short A few options to cover this gap is by adding a larger custom valance, a cornice, or drapery above the blinds. If you are handy you could even mount wooden valance boards at the top and paint or stain them to match the horizontal blinds.
How do you adjust the tilt cord on blinds?
Changing the Tilt Mechanism Remove the blind from the window. Remove the end stiffener at the end of the headrail where the tilt mechanism is located. Slide the tilt rod over (out of the mechanism) to free the tilt mechanism. Snap-out the tilt mechanism and replace with new one.
Can I add length to blinds?
Slats can be added to a blind as long as extra ladder strings exist at its bottom. Adding slats to wood, faux wood, aluminum or vinyl blinds allows homeowners to extend the blind’s length. It is possible to add slats to a blind only when unused ladders exist at the bottom of the blind.
Can blind cords be shorter?
Go about 2 inches lower than your desired height and mark with a piece of tape. If your window treatment has multiple cords, put the tape around all of them. If your cord is made of smaller cords that join to form a larger cord, you will only be able to shorten the larger cord. Do not cut the smaller cords.
Does height of blinds matter?
You’re right in thinking that your blinds need to be slightly smaller than the window. But, all of our blinds and shades require slightly different deductions to height and width for the perfect fit. Just give us the exact size of the window opening and we’ll make blinds that fit perfectly.
What are extension brackets for blinds?
Extension brackets are used to push an outside mount further away from the wall. Hold down brackets are mounted to the door or wall and attach to the window covering. They are used to secure the bottom of the covering.
Can you adjust the length of cordless blinds?
These shades work with a lift mechanism either through the headrail or the bottom rail. To adjust, open or close them, you can either lift them or lower them. The bottom rail can be twisted to adjust and open their slats, or a wand can be used to operate them.
Can blinds be longer than window?
In most cases, it is OK to have your blind longer than your window, even for inside mount. If you order the shade too long, it may not align properly when lowered to the sill of your window. Measuring a Window for Inside Mount. An inside mount blind should fit the window measurements perfectly.
Does it matter if venetian blinds are too long?
It is important to alter them to the correct length because if Venetian Blinds are too long, they will bunch at the bottom which can ruin the look of the blinds.
Can you shorten zebra blinds?
They will not be cut or shortened as that will cause the blinds to stop working and will become unrepairable.
How do you shorten a blind cord without cutting it?
You can use cord cleats that will hold the cords at your desired location, ensuring safety while making windows look stunning and clutter-free. These cleats can be easily fixed to the wall on either side of the window. Knotting is the best way if you don’t want to cut down the extra blind cord.
Can I Motorise existing blinds?
If you still love the look of your window treatments, but not their (lack of) functionality, we can motorize most existing blinds and shades. By adding a motor to the tilt of blinds and the lift of roller shades, you can add new life and functionality to what you already have.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
Can you put 2 blinds together?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
How much space needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
What are spacer blocks?
Spacer blocks push your blinds away from your wall or door. You need spacer blocks when your trim or molding might keep your blinds from hanging straight down when mounted directly on the wall or door. One spacer block will push your blinds or shades about 1/4-3/8 of an inch away from the wall.
How do you adjust the length of a cordless mini blind?
Follow these steps on how to shorten cordless mini blinds: Measure Window’s Height. Mark The Mini-Blinds To Determine Length. Remove The Rail Plugs. Lift Cords And Pull Upward. Slide And Remove Slats. Fix Back The Bottom Rail. Fix Back Lift Cords. Replace The Rail Plugs.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How long can window blinds be?
Common window sizes include: Double Hung Window: Standard lengths vary from 36 to 72 inches, and standard widths extend from 24 to 48 inches. Picture Window: Standard heights range from 2 to 8 feet, and standard widths are 2, 3, 4, 5, 6 and 8 feet.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
