Table of Contents
Can I install Pergo flooring myself?
Learning how to install laminate flooring is an ideal project for DIYers and can instantly help upgrade your home. You can easily lay DIY laminate floors in almost every room in your home, including kitchens, since it doesn’t have to be glued down and doesn’t involve grout or mortar.
Do you need underlayment for Pergo flooring?
The Pergo flooring must be placed at least a 1⁄4″ beneath the undercut jambs and casings. Pergo planks are installed over Pergo SilentStep™ or Soundbloc™ foam or equivalent foam underlayment when the Pergo product that you are installing does not have an attached underlayment foam.
Which is the tongue side of Pergo flooring?
Installing laminate flooring. Install the tongue towards the wall you are starting on. The tongue should be removed from the long side of all of the planks in the first row and from the short end on only the first plank.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. If it is too short, cut a new plank in half and use one half to start the second row.
Where do you start when laying laminate flooring?
Start at a straight wall and lay your first row joining all the edge boards. The first board should be a 1/2 board then continue along the row. Use spacers to ensure you maintain a 10mm gap against the wall. If you don’t have spacers some cut-offs from your laminate floor will work.
What happens if you dont use underlayment?
If the subfloor in your home or property is uneven, then your laminate floor could move and shift if it doesn’t have an underlayment for support. As a result, the floor will be more prone to wear-and-tear and could even warp. The more stability, the less likely you’ll have to pay out of pocket for costly repairs.
What part of the room should you start laminate flooring?
Always start hardwood flooring along the most prominent and noticeable wall in the room. This way, if the room is out of square, the crooked cut will be hidden under the cabinet’s toe kick. In order to keep the floor straight and square, start laying the laminate away from the wall because the wall may not be straight.
What side of Pergo goes against the wall?
The tongue is the side that you will want to place against the wall as you start your laminate-flooring installation.
Do you nail the tongue or groove?
For tongue-and-groove flooring, drive a nail at a 45-degree angle through the tongue, then conceal it by engaging the groove of the next board. Be sure to countersink the nail — drive it slightly below the surface of the wood — to prevent interference in the joint.
Which way do you lay laminate flooring in multiple rooms?
The best direction is based on the shape of your house. There is no right direction, but the more accepted rule is that the floor direction should run parallel to the longer walls, but long hallways are exempt from this rule.
Is there a pattern to laying laminate flooring?
Laminate flooring should be laid in a “random” stagger pattern. The remaining piece of one row should start the next row. Each piece must be 6 inches or greater. If the remaining piece is less than 6 inches, start the row with a full piece.
What happens if you don’t stagger laminate flooring?
The main problem with laminate flooring that has not been properly staggered is that it is more likely to separate from the boards it is adjoined to. In addition, in severe circumstances, the boards may lift or move out of place.
Can you lay normal laminate in herringbone pattern?
It is possible to install laminate flooring in a herringbone pattern, provided you purchase the correct type of flooring. Most manufacturers and suppliers offer a range of herringbone laminate floors that come in a vast array of shades, patterns, styles, and colors to suit your style and decor.
Where do I transition flooring in doorways?
So, you’ll want to make sure that your transition from one floor to another is set right in the middle between the door. All you’ll do is simply change the boards in the middle of the doorway and continue your installation with the other flooring in the other room.
What flooring does not require underlayment?
However, you’ll want to use one in every other application including covering existing hardwood floors, vinyl flooring that isn’t cushioned, and concrete floors. You also do not need an underlayment if your vinyl plank flooring has underlayment installed, however, you may need a vapor barrier.
How thick should underlayment be?
Underlayment. Underneath the top flooring layer is often (though not always) an underlayment. It comprises padding materials and is typically about 1/4 to 1/2 inch in thickness. The purpose of the underlayment is to provide a sturdy yet comfortable layer for your outer flooring to sit on.
