Table of Contents
Where do you start when tiling a bathroom?
You typically want to start your bathroom tile installation in the back corner. But if you just start tiling from the back corner, your most visible areas will not line up as planned. Instead, carefully layout the floor tiles with the tile spacers in between them.
Do you tile under the toilet or around it?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
What do you put under tile in a bathroom?
1. Backer Board. This is the industry standard most preferred by construction pros when installing ceramic or porcelain tile. Backer board comes in four-foot-by-eight-foot and three-foot-by-five-foot rigid panels that contain a combination of cement, fiberglass, and sometimes crushed glass particles.
What goes under a tile floor?
Underlayment is something you put on top of your substrate to prepare it for tiling. The substrate (or subfloor) is the ground, whether it’s made of plywood or cement. Cement board or backer board are the most standard underlayments.
Where do you start when tiling a floor?
Find the midpoint of each wall and snap chalk lines on the floor. The line crossing at the room’s center are the starting point of the tile. Lay a row of tiles along a straightedge more than halfway across the room. For consistent joints, use tile spacers.
Where do you start when tiling a wall?
It’s always advisable to start tiling your grid in the centre of the wall, as it’s easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
Do you start tiling from the top or bottom?
Here’s how you do it: Install the first four tiles in a pyramid: three on the bottom and one on top. Every subsequent row is a process of draping over the pyramid, back and forth. Begin your first drape on either the right or left side, and bring it up, over, and down the other side.
Should I lay tiles horizontal or vertical?
Lay bathroom wall tiles vertically when you want your room to look taller. If you have a low ceiling but a wider floor space, you may like to choose this option to open up your space vertically. Use large format tiles instead of many small tiles, as having many grout joints can make the space feel more cramped.
Is it okay to tile around a toilet?
Tiling around a toilet to save a few dollars in labor will leave you with an unprofessional installation, and your guests will notice. It is almost impossible to cut flooring, especially ceramic tile or wood, precise enough to fit snugly around a toilet base.
Do I need to grout tile under toilet?
If the toilet sits securely to the floor without rocking or leaving any noticeable gaps, it is not technically necessary to grout or caulk the toilet to the floor. This is a matter of aesthetics and personal preference.
Do you lay vinyl tile under toilet?
It’s considered best practice to always put a toilet on top of the flooring, whether the floor is made of wood, vinyl, tiles, etc. Not only will placing the toilet on top of the vinyl plank flooring generally look better, but it also ensures that the weight of the toilet is held by the floor and not the pipes.
What is the best subfloor for a bathroom?
Traditionally, exterior grade plywood has been the subfloor material of choice for many bathroom flooring projects. Plywood is made by gluing alternating layers of wood veneer. CDX plywood (¾”) in particular is used often because it has a high level of resistance to moisture and humidity.
What is better Ditra or cement board?
Ditra is waterproof, while cement board lets water through but won’t be damaged by it. This may make Ditra a better choice if moisture from below is a concern, such as with some outdoor applications or installations over concrete.
What kind of subfloor is needed for ceramic tile?
Exterior-Grade Plywood Exterior plywood is an acceptable underlayment for tile and is preferred to interior-grade plywoods because the bonding adhesives used are waterproof. If water seeps through the tile installation to the underlayment, it will not cause the wood to swell, as happens with interior-grade plywood.
Is it necessary to put cement board under tile?
Whenever you’re laying tile on a wood subfloor, you need to first install cement backerboard to prevent leaks and water damage that could harm your flooring and the structure of your home. Unlike wood or drywall sub-surfaces, cement backerboard will not rot, warp or grow mold and mildew when exposed to water.
Do you need underlayment for tile floor?
Some people usually ask themselves if porcelain tiles need underlayment, well yes, they do. For your porcelain tile to last for long, you need an underlayment. Both porcelain and ceramic tiles are rigid, so if they are installed on surfaces that are not flat, they can crack easily.
Can you tile directly onto plywood?
Tile can be laid on plywood. But do not install tile directly on the plywood subfloor itself. Use an intervening layer of a sheet of thinner plywood.
Can you tile directly on concrete?
A: It’s perfectly acceptable to put tile directly on concrete — with a couple of caveats. First, it is important to determine if there is moisture coming up from the slab. Those products should help prevent any cracks in the slab from damaging the newly installed tile.
How thick does the subfloor need to be for tile?
The subfloor under the tile should be at least 1 1/8″ thick, with a minimum of 5/8″ thick exterior grade plywood topped by 1/2″ cement backer board.
