Table of Contents
How to keep a pool cover from sagging Keep the center of the cover higher than the sides. Secure the outer edge with heavy objects such as H2O blocks or bags. Adjust the sagging on the cover as soon as possible. Use a portable pool cover pump instead. Build your own cover support structure.
How do you keep an Intex pool cover from sinking?
5.1 Keep The Middle Section Of Your Pool Cover Higher Than The Sides. 5.2 Use Heavy Objects To Keep The Edges In Place. 5.3 Fix It As Soon As You See It. 5.4 Opt For A Portable Pool Cover. 5.5 Build A Support Structure. 5.6 Use Pool Pillows. 5.7 Use H2O Bags. 5.8 Use A Pool Safety Cover.
Should pool cover be tight?
How Tight Should a Safety Cover Be? Safety covers should be drum-tight, with only a slight deflection in the middle. When covers are too loose, leaves can blow under easily, and a high water level in springtime quickly traps leaves and turns your cover into a giant tea bag.
Should a pool cover sag?
Safety cover sagging is okay, well in most cases. It is not the safety-cover that supports the snow and ice. It is the water underneath your cover that helps it and keeps it from sagging too much. Whoever sold you the cover should have warned you or directed you to read the directions.
Should a pool cover touch the water?
The cover is designed to touch the surface of the water. So your pool should always be filled when covered, and the water level should never go below 18 inches from the top of the pool. Check the water level of the pool and fill it up if it goes below 18 inches.
What can I use to hold my pool cover down?
Water bags are the easiest and most effective way to hold down your winter pool cover. Built from heavy-duty vinyl designed to withstand sub-zero temperatures, water bags provide peace of mind. Once installed, you know your pool cover will be secure all winter long.
Why does my pool pillow keep deflating?
When rain, snow and ice accumulate, they will put pressure on the cover and cause the ice to push inwards towards the pillow. In many cases this can cause the pillow to deflate or pop which means it is doing its job.
Is it OK to leave a pool uncovered in winter?
People often avoid covering their pool for the winter because pool covers are an additional cost. However, an uncovered pool will cost you far more over the span of a few short years than a simple pool cover. For one thing, an uncovered pool will become a catch-all for leaves and debris.
Does the pool pillow have to be in the middle?
Yes. The pool pillow should be fairly centered within the pool to allow for even distribution of ice. If the pillow is off to the side, there will still be an area to compensate for the encroaching ice, but this often puts a strain and tugs on the pool cover due to the uneven distribution of ice and snow.
How much weight can a winter pool cover hold?
The official standard states, “In the case of a pool with a width or diameter greater than 8 ft. from the periphery, the cover shall be able to hold a weight of 485 lbs. (2 adults and 1 child) to permit a rescue operation.” In certain unusual circumstances, the weight may be even greater.
Can you run pump with pool cover on?
It is safe to run the pool pump and filter with a swimming pool cover on. The pool cover doesn’t in any way stop or hinder the pool pump from circulating the water or carrying out its function. On the other hand, the pool cover is used to protect the pool from contaminants and debris that may fall into the pool water.
How much water should be on top of a pool cover?
Ideally, 2 inches of water is acceptable on top of your cover simply because it aids in keeping the cover on the pool when it gets windy however, having excess water on top of the cover can cause severe damage to your pool structure as well as to the water quality underneath the cover.
How do I stop my pool cover from blowing in the wind?
To secure the cover, place several sandbags or coffee cans filled with sand around the edges of the pool to help with holding cover in place. Make sure you have enough sandbags or coffee cans filled with sand to cover the entire perimeter of the pool’s cover.
How do you keep an above ground pool cover down?
Above ground pools don’t typically use weights. Because these pools are higher off the ground, the cover is usually tied down. This can be done by getting a cover that ties to the pool frame itself, or by putting stakes and tie downs in the yard around the pool to hold the cover in place.
How do you secure a pool cover to a deck?
You will need to drill the hardware to the deck so that you can conveniently place your pool cover over it. When you pull the cover over, you can strap it to the grommets or hardware in the deck. You will need to install the straps around it evenly, but the hard part of installing it is getting the last straps fixed.
