Table of Contents
How do I keep the water in my Intex pool clean?
Should I put chlorine in my Intex pool?
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
What chemicals are needed for Intex Easy Set pool?
Intex Pool Chemical Startup List Alkalinity increaser (sodium bicarbonate) Alkalinity decreaser (sodium bisulfate) pH increaser (sodium carbonate) pH decreaser (sodium bisulfate) Calcium hardness increaser (calcium chloride) Sanitizer (liquid chlorine, chlorine tablets, Intex saltwater pool system).
How can I keep my pool water clear?
How to Keep Your Swimming Pool Crystal Clear Maintain Chemical Levels. Maintaining proper chemical levels in your pool is the most important step in keeping the water crystal clear. Administer Shock and Algaecide Weekly. Backwash. Skim Regularly.
How often should I shock my Intex pool?
We recommend shocking Intex pools every week, especially if you’re having a heat wave or heavy rains. Heat and excess water can knock your chlorine levels to sub-par levels pretty quickly. Use a pool shock with a decent amount of available chlorine, and run your filtration system after you shock your pool.
Can I just throw chlorine tablets in my pool?
NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.
How long after putting chlorine in a pool Can you swim?
It is recommended to wait at least 20 minutes to an hour after adding water balancing chemicals. You should wait 2-4 hours (or one full cycle through the filter) to swim from the moment you use calcium chloride in your pool. It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours.
How do I keep my 12ft pool clean?
7 Tips To Keep Your Intex Pool Clean Always measure the pH value in your Intex pool. Think carefully about where you place your pool. Cover your Intex pool when it is not in use. Only use tap water to fill the pool. Measuring is knowing: be careful with chlorine. When do you choose automatic cleaning. Watch out for dead algae.
Should I cover my Intex pool every night?
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
Should I cover my Intex pool when raining?
Leave Your Pool Open When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
Can you use liquid chlorine in a vinyl pool?
Liquid chlorine can be added immediately, but should be poured out to very specific areas of the pool. Never place chlorine tablets in skimmer basket. This could result in a high concentration of chlorine to develop around the skimmer and main drain, which will damage the liner.
How do I keep my inflatable pool water clean naturally?
Top Ways to Keep Inflatable Pool Water Clean Clean the Pool After Any Splash. For a pint-size pool, this is obvious. Skimmer Nets. If you own any pool, you understand the need for a skimmer net. Cover the Pool. Personal Hygiene Is Key. Aqua Brooms Work. Try Scum Bags.
How do I keep my pool from turning green?
How To Keep Pool From Turning Green: Maintenance Tips For Clear, Blue Water Wipe The Tile Line And Clean Out Skimmer Baskets. Clean Pool Filters Regularly. Size Your Pool’s Pump and Filters. Check Your Pool’s Chemistry. Shock Your Pool On A Monthly Basis.
How do you clean the bottom of an Intex pool?
There are no less than 5 ways to clean the floor of an Intex pool. Use your Leaf Rake to scoop debris from an Intex pool. Use a Leaf Gulper garden hose vacuum to clean an Intex pool. Use a Vac Head and Hose to vacuum with your Intex pump/filter. Use a Handheld Battery Operated Cleaner to vacuum an Intex pool.
How often should I add chlorine to my pool?
Chlorine has a low pH level, and in order to maintain your pool water’s clarity and balance, shocking weekly will allow you to quickly raise the chlorine level, which will rid the pool of contaminants, without lowering the water’s pH levels.
How often should I shock my pool?
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
How much chlorine do I add to my pool for the first time?
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
Do you shock pool after rain?
Shock the pool After heavy rainfall, your pool’s chlorine levels will be much lower from fighting off contaminants. Shocking your pool replenishes the chlorine lost from the rain. And while one shock treatment won’t be enough to balance your water, it’ll work in the background as you continue cleaning your pool.
