Table of Contents
Should ductwork in attic be insulated?
Insulate the heck out of the ducts and air handler Attics get really hot. Insulation helps reduce heat flow. But buried ducts in a humid climate are at risk for condensation. The building code now allows it, but only with R-13 on the ducts before you bury them in IECC climate zones 1A, 2A, and 3A.
How do I insulate my attic air ducts?
When HVAC ducts are installed in a vented attic in a dry climate, bury the ducts in attic insulation to protect them from temperature extremes in the unconditioned attic space. Install ductwork so that it is in direct contact with (i.e., laying on) the ceiling and/or truss lower cords.
Can you put insulation around ductwork?
You can insulate the round air ducts serving your rooms with standard insulation batts or special-purpose duct insulation. Insulating your air ducts can save 10 percent to 30 percent on energy bills while improving comfort.
Is insulating ductwork worth it?
The answer to the question of, “Should I insulate the ductwork in my basement?” is…. While insulating basement ductwork will, in fact, reduce energy loss from your ducts, thereby lowering the time your system has to run to properly cool or heat your house, it will also tend to make your basement cooler.
Can you run ductwork through attic?
The best place for ductwork is inside the thermal boundary of the house, not in an unconditioned, vented attic. Running unprotected ductwork through an attic can court problems. Particularly in hot-humid climates, moisture can collect on the outside of ducts in summer.
What type of insulation is used for ductwork?
The most common material used for insulating heating and cooling ducts is fiberglass. Fiberglass duct insulation is available in various thicknesses and R-values and in either a flexible or rigid form.
Does exposed ductwork need to be insulated?
A: Depending on the climate and the ducts’ location, it may not be necessary to insulate them. The ducts are exposed to the same cold, heat and humidity that exist on the outside. Insulating them is essential in colder climates, optional in milder ones and necessary in humid climates to prevent condensation.
How do I stop condensation in my attic ducts?
Try to reduce the humidity level in the air near the air ducts. You can go for a dehumidifier if that helps to reduce the condensation. Unblock any ducts that are restricting airflow and have them cleaned regularly. Regularly clean your air filters and change them once every three months.
Should ductwork be insulated in a crawl space?
As the cool air passes through the warm ducts in a warm crawlspace, condensation develops. This condensation can lead to moisture buildup inside your ducts. Insulating your ductwork prevents this condensation in the first place. In the long run, proper insulation will better protect your family’s health.
How do you insulate a ductwork ceiling?
When insulating HVAC ductwork, use a foil, faced fiberglass insulation with an R-6 or higher R-value. Use the type of metallic foil duct tape recommended by the insulation manufacturer to seal and hold the insulation in place. Make sure the foil surface of the insulation is free of dust before applying the tape.
Can you put fiberglass insulation around ductwork?
Fiberglass insulation can touch HVAC ductwork provided the ducts are not leaking or forming too much condensation. The insulation should be snug enough to prevent significant gaps throughout the ductwork.
Why is insulation required for ductwork?
In general, all air ducts should be insulated: to provide noise control, to save energy and, where necessary, to prevent condensation. Condensation control is always required when the temperature in the room through which the duct runs is higher than that of the cooled air in the duct.
Do you have to insulate metal ductwork?
Ducts tend to be made of thin material, usually sheet metal or fiberglass, which is why it is so easy for the air traveling through them to be lost. The ductwork in unconditioned areas, such as basements, floors, and ceilings is where ductwork insulation is most necessary.
What is the disadvantage in having ducts in the ceiling?
Ductwork serving ceiling ducts is usually exposed to attic temperature extremes in both winter and summer. In winter, heat loss from attic ducts may affect furnace warmth while heat gain may raise the temperature of A/C airflow in summer. Ductwork serving floor ducts usually passes through the basement or crawlspace.
Is insulated ducting better?
Ducts that leak heated air into unheated spaces can add hundreds of dollars a year to your heating and cooling bills, but you can reduce that loss by sealing and insulating your ducts. Insulating ducts in unconditioned spaces is usually very cost-effective.
How do you cover exposed ductwork?
If the ducts are easily reachable, consider covering them in flexible, magnetic sheeting. The magnetic sheets are solid, glossy colors that wrap around and conceal the ducts. They are easily removed if you want to change the color or look of the room.
Can you use Reflectix on ductwork?
Ease of handling and quick installation make Reflectix® the first choice when selecting insulation for round or rectangular ductwork in HVAC systems. The product provides an R-8.0 when installed with a 0.75” air gap between the duct and the insulation, and R-6.0 when installed direct to the duct without a spacer.
How much does it cost to insulate air ducts?
of ductwork insulation is typically $1,000–$2,700. Costs vary depending on the insulation material you choose. HVAC duct insulation costs $1.15–$5.50 per sq.Highlights. National Average Cost $2,500 Average Range $1,000–$2,700 Minimum Cost $750 Maximum Cost $6,000.
