Table of Contents
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you install a wood mantel on a stone fireplace?
How to hang a wood mantel on stone fireplace Drill a hole in the stone fireplace using a mason drill bit. Cut the rebar to size. Fill hole with Fuz It (liquid nail) Insert the rebar into the hole on the stone and hold in place to allow liquid nail to grab rod. Allow to dry for 48 hours before hanging mantel.
How are mantels attached to fireplaces?
Since neither option is very sturdy, we recommend you attach the mantel to a cleat—a simple piece of lumber securely fastened to the wall. One cleat runs horizontally under the mantel shelf, and the others run vertically inside the legs (most mantels are hollow in back).
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How far above fireplace should mantle be?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
How do you build a floating mantel on a brick fireplace?
How to build a floating mantel (or shelf): Prep your surface. For me, that meant staining our fireplace white beforehand. Create mantel support. Create a hollow box for your mantel. Finish the mantel. Attach your shelf support onto the brick. Fit your mantel onto the mantel support. Style your finished mantel!.
How thick are mantels?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
How do you hang a heavy mantle?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do I remove a wood mantel from Brick?
How to Remove a Mantel From a Brick Wall Remove any decorative trim around the outside edges of the mantel. Insert the short end of an I-beam construction pry bar between the back edge of the mantel and a brick wall. Cut through the mounts with a reciprocating saw to release the mantel.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How do you secure a mantel to Brick?
Mark where the anchors or brackets line up on the mantel and drill the corresponding holes. Lift the mantel and place it so that the lag bolts or brackets fit into the holes. For extra security, coat the tip of each bolt with liquid nails or another adhesive just before installation.
How wide are most fireplace mantels?
For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches. The mantel should not be so wide that it reaches anything else, like a wall, window or door.
What is code for a fireplace mantel?
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.
Why do fireplaces have mantles?
Why Do Fireplaces Have Mantels? The purpose of a fireplace mantel was traditionally to catch smoke before it entered the room from the firebox of an open fireplace, but mantels in more modern times are used primarily for decorative and aesthetic purposes.
Can you use timber for a fireplace mantel?
This reclaimed barn beam would be a true rustic fireplace mantel in your home or business. All mantels are surface washed and kiln dried, and have a variety of finish options and customizations to choose from. These solid wood timbers are cut to your specified length and finished with your preferred shade of finish.
Can you use pine for fireplace mantel?
Not all woods are suitable for fireplace mantel shelves. Softer woods like fir and pine look attractive when they have been sanded down and polished, but are known to crack easily with the passing of time.
What is the best way to drill into brick?
Begin by drilling a pilot hole using a small masonry bit. Then, attach the larger bit and drill again to make a bigger hole. Make sure the drill is perpendicular to the brick wall. Drilling through brick and mortar places stress on the drill, causing it to heat up.
How high is too high for a mantel?
A mantel that is at least 12 inches above the opening of the fireplace should be high enough away from the flames to keep you, your family, and your house safe.
