Table of Contents
Table of Contents Step 1: Measure Your Window. Step 2: Use Filter Strips to Determine Layout. Step 3: Measure Shutters. Step 4: Attach Filler Strips. Step 5: Mount Shutters. Step 6: Check Alignment and Adjust. Step 7: Mark Hardware Placement. Step 8: Measure and Pre-Drill Holes.
Can you fit shutters to any window?
Yes – Shutters can be fitted to almost any window using several frame configurations, although there are two main approaches for this solution – either inside or outside the window recess.
Is it easy to install shutters?
Adding shutters to a house is an easy way to boost its curb appeal. Shutter installation is a straightforward project and, depending on how many windows you have, the job can be completed in an afternoon with the right tools and some basic DIY skills.
How should shutters be hung?
When open, shutters should be located tight to the window covering all or part of the window casing and projecting outward at the window edge. Architecturally, it is not necessary for a feature to actually be functional; however, it must always appear functional.
How tall should shutters be?
It should look like the shutters could close inside the window opening. Standard vinyl shutters are available in the following heights: 35″, 39″, 43″, 47″, 51″, 55″, 59″, 63″, 67″, 71″. Window Width Shutter Width 16″ or smaller 7″ 17″ – 22″ 9″-10″ 23″ – 31″ 12″-14.5″ 32″ – 40″ 14.5″-16.25″-17.75″.
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
Can I install shutters myself?
Interior Shutters are a timeless, durable choice for homes of any style, but they can be intimidating to install without professional help. Within innovative new design, the Simplicity Wood Shutter is easy to install, even for a window novice.
Is it hard to install interior shutters?
Installing shutters won’t take long, even if you’re a DIY novice. In fact, most of our customers fit their shutters within 60 minutes – and we’re here to help you. Simply select the type of window and the particular guide you need to download your Step By Step Installation Guide.
How do interior shutters work?
Plantation shutters consist of a frame which is permanently attached to your window opening, and a shutter panel which is hinged inside the shutter frame. Since each shutter panel is hinged into the shutter frame, each can swing open completely by just pulling on the panel, which allows it to swing open.
Should shutters close up or down?
Tilting the shutters all the way down is a good position to leave your shutters in if you’d prefer not to adjust them with the light. But if you want to maximise the light coming into the room without opening the louvres completely, tilt the shutters downwards to bring as much light into the room as possible.
When should you not use shutters?
You should not add shutters to the following: Double mulled windows. Windows that are winder than they are tall. Bay windows. One side of a window, leaving the opposite side unshuttered. Windows that are so close, an open shutter would obscure part of the adjoining window.
Is it OK to put shutters on the back of the house?
Whether it’s high winds or flying debris, functional shutters act as a shield for your windows and help keep everything inside safe. Windows at the back of a home are just as vulnerable to weather damage as those in the front; therefore, shutters can provide the same benefits on both sides.
Can you put shutters on double windows?
Shutters should be avoided on double-mulled windows, picture windows, bay windows, and most dormer windows.
How much do interior window shutters cost?
Plantation shutters typically cost $145 to $347 per window depending on the size and material chosen. Wood shutters cost $200 to $350 per window, while faux or composite shutters cost between $70 and $260 per window. Overall, you can expect to spend $20 to $45 per square foot.
How thick are shutters?
Shutter stiles shall be a minimum of 2-5/8 inches wide by 1 3/8 inches thick. Top rails and midrails shall be a minimum of 2 3/8 inches wide by 1 5/16 inches thick. Bottom rails shall be minimum 4 1/8 inches wide by 1 3/8 inches thick.
What are cafe style shutters?
Cafe style shutters are half the height of full height style shutters with panels covering the bottom half of a window only. You can design your shutters online, get an instant quote, save your cart or place your order with an easy two-step procedure.
Are wood or vinyl shutters better?
When choosing between wooden shutters vs. vinyl shutters, wooden shutters are the better choice. They look authentic and are more durable and versatile than vinyl shutters.
How do I stop my shutters from closing?
Adjusting Louver Tension Locate the hole on each side of the shutter panel. Inside the hole is a screw called the “tension screw.” 2) Using a Philips head screwdriver, turn the screw ¼ turn to the right to tighten the louvers or ¼ turn to the left to loosen them.
What do you do if your windows are too close for shutters?
The way to attach shutters when windows are too close.Shutters for Other Types of Windows and Spaces Attach a large (double size) shutter, the size of the window on each end. Mount double shutters at each end. Mount four shutters in the manner you would normally if the window were not Ganged.
Are Blinds to Go Easy to fit?
Our collection of EasiFIT and PerfectFIT blinds are so easy to install, you can transform the look of your conservatory in minutes. There’s no need for drills, screws or any other tools. Designed to fit any uPVC window or door with a rubber bead they simply click into place with no effort and no fuss.
