Table of Contents
Is it hard to install vertical blinds?
Vertical blinds are easy to install. A screwdriver is all that is needed to install your blinds. Or for an easier installation, you can use a cordless screwdriver or a drill with 1/4-inch hex head bit. Before starting, carefully unpack your blinds and mounting hardware.
Can you fit your own vertical blinds?
You can fit the vertical blinds in different ways depending on the available space and your own preference. By using separately available spacer brackets you can also fit the top rail of the blind free-standing at any desired height.
Which way should vertical blinds face?
The direction — up or down — to close blind slats is a matter of personal preference, but if you want more privacy, tilt them up, with the rounded side facing out. With window blinds tilted up, passers-by can’t see in: The convex side faces the window, creating less space through which to view.
How far should blinds be from the floor?
We recommend adding between 3” to 6” to your width measurement. Also add 2 ½” to your height measurement to allow enough room for the mounting brackets above the opening. Our suggested floor clearance is ½” to 1”. At least 2” of flat space is required to outside mount verticals.
How do you hang vertical blinds without drilling?
All you need to do is trim the paper blind to fit your window, peel the adhesive strip and stick them securely, pressing firmly. It’s that easy! With instant stick on blinds from BlindsInABox, it really is easy enough to install blinds and add a bit of privacy without drilling.
How do you change vertical blinds to the right side?
To switch your vertical blinds so they open on the right side instead of the left, you’ll need to take them down and rotate them horizontally by 180 degrees. You’re essentially rotating the blinds so the front is now on the back side.
How do you install blinds without brackets?
Place the head rail over the top window trim and center it over the window. Place a bubble level on top of the head rail and position the blind so it remains level on the top window trim. Mark the holes you drilled onto the head rail by placing a screw into each hole then pressing the screws into the wood.
Can you put 2 vertical blinds together?
When you hang multiple blinds in the same window, each blind has its own headrail and is installed separately, so you can operate them individually. For two (2) separate blinds in one window, take the smallest width and divide it by 2. Then add 1/4″ to the width of each blind.
How far do vertical blinds stick out?
Decide how high you will install the vertical blinds. They need to be high enough that the vanes will not touch the ground or drag along it. Most people install their vertical blinds so the vanes hang 2-3 inches above the ground.
What do you need for vertical blinds?
Your blinds should have come with the screws that you need to fit the blinds to the wall. You will also need a spirit level, masonry drill, tape measure and screwdriver. Vertical blinds are a great option to dress windows – and they’re extremely versatile, too.
Which way do you close vertical blinds for privacy?
Turning the vertical blinds fully right or left will close the view completely. This will give you the most privacy. You can keep it partially open for having other benefits sacrificing a bit of privacy.
Which way do you turn blinds for most privacy?
Adjusting your blinds with the slats facing down provides the maximum privacy. When in this position it offers the most coverage and protection from the outside looking in.
Should you close your blinds at night?
Closing window blinds at the right times can reduce energy use at home. During cold winter nights, heat is lost through windows. Closing the blinds adds some insulation to the windows, reducing heat loss during cold periods. Some blinds also reflect heat back into the room.
How long should vertical blinds be for Windows?
When measuring for outside mount blinds, add at least 4 inches to every side of the window to make sure your room is private and that the blinds block enough light. The most common standard vertical blind sizes that you can buy quick ship or off-the-shelf range from 24-inch x 72-inch to 72-inch x 72-inch.
How far should vertical blinds be off window sill?
Measure from top (where you want the rail to be) to bottom (where you want the bottom of your blind to finish). We recommend to start your measurement at least 15cm above the recess and finish at least 15cm below the window sill to prevent light bleed.
Do curtains have to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
Can I hang blinds with command strips?
Command strips are one of the easiest and simplest ways of hanging blinds without making any damage to the walls or window frame. These strips work well on any surfaces like stained, painted, plaster, drywall, metal, and many more.
