Table of Contents
How do you install an underground sprinkler system?
Sprinkler System Installation in 10 Steps Step 1: In-Ground Sprinkler Overview. Step 2: Dig the Trenches. Step 3: Make the Water Connection. Step 4: Install the Zone Valves. Step 5: Place the Pipes in the Trenches. Step 6: Connect the Pipe at the Valve Box. Step 7: Install the Pop-Up Sprinklers. Step 8: Roll Out the Irrigation.
Can I install my own sprinkler system?
Many homeowners choose to hire a contractor to install a sprinkler system, as constructing a DIY sprinkler system can be a challenging project for someone to complete on their own. However, with the right supplies and a little know-how, you can construct your own sprinkler system and save some money on labor costs.
Are underground sprinklers worth it?
The system is susceptible to underground leaks and can be damaged by lawn mowers hitting the sprinkler heads. And it requires ongoing maintenance, such as blowing out the water in the lines in the fall to prevent the pipes from freezing and cracking in the winter. But for some people, a sprinkler system is worth it.
How deep should sprinkler pipes be buried?
Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area’s freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.
How many sprinkler heads can you put on one line?
At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.
How many sprinkler heads do I need?
As a general rule, HomeTips experts recommend placing the sprinkler heads, so their spray doesn’t overlap. The optimum distance is for one sprinkler head’s throw (how far the water from the sprinkler will travel) to touch the next sprinkler head, or “head-to-head” coverage.
Does a sprinkler system add value to your home?
If you are wondering whether a sprinkler system can add value to your home, the answer is yes, absolutely! Adding a sprinkler system is an investment that can add upwards $3,000 of value to your home. It adds curb appeal, convenience, and water efficiency features to your home for the market.
How much does it cost to install a sprinkler system?
Sprinkler System Cost Sprinkler system installation costs $2,540 on average, or typically between $1,706 and $3,525. The size of your yard and the quality of the materials make the biggest difference in price, with larger sprinkler irrigation systems costing nearly $10,000 per acre.
Should you install sprinklers before sod?
Sod must be installed after the irrigation. You may install sprinklers and sod before any hardscaping but changes may need to be made at a later date, for an additional cost.
How long does a sprinkler installation take?
How long does it take to install the sprinkler system? Usually 3 – 4 hours depending on the size of the job. 90% of installations are completed in one day.
What do I need to know before installing a sprinkler system?
5 Things to Know Before Installing an Irrigation System Different Types of Sprinkler Heads. There are a wide range of sprinkler heads that are used in irrigation systems. You May Need a Building Permit. Different Types of Irrigation Systems. Cost of an Irrigation System. Excavating Your Yard.
How do I stop my sprinkler lines from digging?
How to Avoid Digging Up a Sprinkler System Look at the design map given to you by your installation company. Locate where a line should be at the edge of the map that crosses the area where you will be working. Mark the area with a flag. Dig down in the area marked, using a hand trowel.
How high should pop-up sprinklers be?
3 Inch Pop-Up Height (or higher): Unless you just like to trim grass around sprinkler heads, make sure the pop-up height is 3″ or more. This way the spray nozzle will clear the top of the grass. Most professionals use 4″ pop-up sprinklers in lawn areas, and 6″ or 12″ pop-ups in shrub areas.
Is it bad to water grass at night?
“A wet lawn at night is the perfect condition for fungus to grow. Along with cutting grass too short, watering at night is about the worst thing you can do to a lawn.” As a general rule, you should water long enough to moisten the soil down to about 6 inches, which is the average depth of a healthy grass-root system.
What size pipe should I use for sprinkler system?
For schedule 40 PVC, use 1/2-inch pipe for a 4 GPM system, 3/4-inch pipe for 8 GPMs, 1-inch pipe for 13 GPMs, 1 1/4-inch pipe for 22 GPMs, 1 1/2-inch pipe for 30 GPMs, and 2-inch pipe for 50 GPMs.
What type of pipe is used for sprinklers?
Polyethylene and PVC are two types of pipe that are frequently used in sprinkler and irrigation systems.
What is the minimum distance between sprinkler heads?
The minimum distance a sprinkler can be installed below a ceiling is 1 inch. The maximum spacing between two sprinklers is determined by the rating on the sprinkler head (usually 15 feet, but there are other spacing distances, depending on the manufacturer). The minimum spacing between two sprinklers is 6 feet.
What is the minimum distance between a sprinkler head and any obstruction?
In a nutshell, NFPA 25: Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems says that objects that can block a sprinkler’s spray must be at least 18 inches away from the deflector.
