Table of Contents
Where should under cabinet LED strips be placed?
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
How do you install LED lights under kitchen cupboards?
Step 1: Double check your lights before cutting or installing Lay out all the products to create a mock installation to make sure you have all the supplies necessary. Unroll the LED strip lights from the plastic reel. Attach the uncut lights to the power supply and turn on the power supply. The strips should light up.
Do under-cabinet lights go in front or back?
When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated. A plug-in fixture may be used for short runs of under-cabinet lighting.
Do under cabinet LED lights need a transformer?
When installing low voltage under cabinet lights, you will have to take some special measures. You’ll need a transformer to convert your home’s voltage supply to a much Page 11 11 lower number, and if you plan to use any accessories, like dimmers, they’ll need to be compatible with your lighting system.
Can LED strip lights be hardwired?
When hardwiring the strips, you will just need to make solid connections between all your strip wires to the output wires on the power supply. This can be done with wire nuts or wiring all strips to a common positive and negative wire so you can make a one to one connection with the hardwired power supply.
How do you hide the wires under cabinet lighting?
One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet’s underside with staples. The wiring length itself should extend directly from the light to the wall.
How many lumens do I need for under cabinet lighting?
The required Lumen per foot depends on the intended usage. A guideline below: Accent lighting – 150 to 250 Lumens/ ft. Under-Cabinet Lighting & Nearby Task Lighting (Lamps) – 175 to 550 Lumens/ ft.
Can you use LED strip lights under cabinets?
Under the Cabinets. If your kitchen has a row of wall cabinets, stick the LED lights along their bottom, or along the kitchen console table. Then adjust the color to whatever you like depending on kitchen decoration style and your preferences, and make the kitchen exude a different aura.
How do I hide LED strip lights in my kitchen?
Hide by plastic molding and wooden tray: For plastic molding, mold the corner edges of plastic to fit the LED light strip which gives the gap in between the strip run to ground. In the wooden tray case, cut the wooden tray according to the wall. Pre-drill the molds to avoid accidental drill while wall mounting.
What is the best color for under cabinet lighting?
Best Color for Under Cabinet Lighting 2700K is considered the same color as the classic incandescent light bulb. 3000K is slightly bluer and is similar to halogen bulb light color, but still has a warm, inviting yellow color to it.
Why can’t under cabinet lights be on a dimmer?
A 300 watt dimmer will be more than sufficient to power your under cabinet lights. Even if you have 12 fixtures at 10 watts each, that is only 120 total watts. This maximum watt capacity for a dimmer typically becomes an issue with recessed lighting where a large room may have a few dozen lights.
What kind of wire do you use for under cabinet lighting?
Although wire size ultimately depends on your light-fixture manufacturer’s specifications, 12-gauge wire is standard for most incandescent and fluorescent under-cabinet fixtures. A basic installation requires a 12-2 NM cable.
How long do batteries last in under cabinet lighting?
The under cabinet lights operate on 3 AA batteries (18 AA batteries included) and have a run time of 100 hours.
Can you run Romex in cabinets?
The National Electrical Code requires that plastic-sheathed cable (commonly called Romex) be protected in areas where it’s subject to abuse. If you can run the plastic-sheathed cable high in the cabinets or behind drawers, you may not need conduit.
How do you wire LED strips to mains?
To get your strip light working, connect the transformer / driver to the strip light ( extending the cable with 2 core flex if necessary). Then you connect your transformer / driver to the mains via a plug or direct to the mains and you’re away.
What power supply do I need for LED strip?
Whether it’s your cell phone, laptop, or in this case, LED strip lights, you’ll need something to take the 120 volts of alternating current (AC) from your wall outlet and convert it into a lower voltage of direct current (DC) that your LED strips (or other electronics) require to run.
