Table of Contents
How much do you overlap smart siding?
Joints must always occur over stud locations. Siding joints shall be staggered over successive courses. Overlap successive courses of siding a minimum of 1”. Siding shall be installed with top (blind) nail placed 3/8” from each end, and 3/4 in.
How long does it take to install LP smart siding?
Therefore, you can expect installation to take an average of 10 to 12 days. If the siding needs painting, expect the job to last an additional five days.
Is Smart siding any good?
While LP SmartSide has a few disadvantages, overall, it’s an excellent siding choice for efficiency and aesthetics. All you need now is a siding contractor to help you install it. To that end, contact us today!Aug 9, 2021.
Can you screw LP SmartSide?
Nail & Screw Requirements LP SmartSide has three product categories: Precision Series, Foundations and Architectural Collection. When installing Precision Series lap in this application, you may use 0.091″ diameter, hot-dipped galvanized ring shank nails or #8 hot-dipped galvanized tapered head wood screws.
How often do you nail LP smart siding?
Installing Trim on Vertical Corners This will give your trim a seamless look from a curb appeal view. All LP SmartSide trim should be fastened with the nails spaced a maximum of 24 inches apart, with at least two nails in each stud. Or you may fasten every 12 inches with a pattern alternating edges along the trim.
How thick is LP smart siding?
LP® SmartSide® Precision Series panel siding is available in 3/8, 7/16 and 19/32 Performance Categories (nominal thicknesses of 9.5, 11 and 15 mm, respectively), 1,220 mm width and in lengths of 2,440, 2,745, and 3,050 mm.
How thick is LP smart siding trim?
Available in two thicknesses 4/4 (0.625″ actual thickness) or 5/4 (0.910″ actual thickness). These products are excellent for use as corner boards, around doors, and windows. All trim boards come in 16-foot lengths which can make installation faster.
How much does it cost to install smart siding?
LP SmartSide cost: $2.00 to $4.00 per square foot for siding and all trim accessories. LP SmartSide installation: $5.00 to $10.00 per square foot.
Does LP smart siding need to be painted?
According to the terms of LP’s application instructions, all exposed edges of LP® SmartSide® siding and trim must be primed and painted with approved paint to protect the siding substrate. The back side is better left unpainted.
Can LP SmartSide panels be installed horizontally?
LP SmartSide siding is designed for horizontal installation only. Un- grooved LP SmartSide Precision series panel siding is available for board and batten applications. Refer to the installation instructions for proper installation.
How long will LP smart siding last?
Both vinyl siding and LP SmartSide are durable, long-lasting options to protect your home. You can expect both products to last well over 20 years with hardly any maintenance needed on your part.
Is Smart siding being discontinued?
She said sales of LP’s SmartSide fiber-based siding, produced at the Roaring River plant, have continued to decline and the company decided to discontinue production of fiber-based siding in the U.S. by the end of 2020.
How often does LP smart siding need to be painted?
They must be painted within 180-days of installation. Refer to the installation instructions for proper finishing of the siding and trim.
Do you need sheathing under LP smart siding?
LP SmartSide vertical siding can NOT be attached directly to studs, it must be attached to a minimum 7/16 category wood structural panel wall sheathing.
What is the difference between SmartSide 38 and 76?
What’s the difference between Series 38 and Series 76 Lap Siding? Other than material thickness, one main difference is 38 Series Lap Siding may be installed on studs spaced a maximum of 16 inches o.c. whereas 76 Series Lap Siding may be installed on studs a maximum of 24 inches o.c.
Is LP smart siding structural?
LP’s proprietary SmartGuard® process helps keep out moisture for long- term durability and strength against harsh weather. Even after years of exposure, LP SmartSide products remain structurally sound, so you can feel confident.
Does LP SmartSide need to be nailed into studs?
When strips are required, they must be installed VERTICALLY and nailed into wall studs, 16 in (405 mm) O.C., over the full height of the wall.
Can I use roofing nails for LP siding?
Can I Use Roofing Nails for Siding? Roofing nails, while they may be galvanized, are generally shorter in length and will not allow for the required 1-1/2 inch penetration into structural framing or wood structural panels and wood structural framing. Stick to nails designed for installing lap siding for best results.
What kind of nail gun do I need for LP siding?
Framing nail guns can be used for siding installation, if the nail being used is long enough to attach the siding firmly to your exterior wood sheathing. While it’s recommended to always use a siding nail gun for siding installation, in a pinch, you may be able to use a framing nailer instead.
Is SmartSide waterproof?
Although most siding products are not completely waterproof nor flood resistant, LP® SmartSide® Trim & Siding is engineered with LP’s proprietary SmartGuard® process to withstand siding water damage and help protect your home from moisture.
What length does Smart siding come in?
Siding products are available in multiple widths and up to 16′ in length for fewer seams and less waste.
Is LP siding fire resistant?
Durable Engineered Wood Siding Because LP SmartSide contains organic material, it is more susceptible to fire than fiber cement. However, when used in combination with LP FlameBlock® Fire-Rated® OSB Sheathing, LP SmartSide siding can still meet code requirements for fire resistance.
