Table of Contents
Where should my return air duct be?
They must be correctly placed and unobstructed —Return ducts are usually placed in hallways, under stairwells, or in larger open areas of your home. This placement ensures that they will be able to pull in enough air to take back to the HVAC equipment.
Does return air need to be ducted?
Return air ducts are necessary for just about every room. Furthermore, without a return air duct in each major room, the supply duct air has to “push” all of the air in the room out of the way as it makes its way towards you. The return air ducts help pull the air as it is being pushed.
How big should my return air duct be?
A typical supply vent is 4 by 10 to 12 inches and a typical return vent is 16 by 20 inches or larger. Houses often have two or more return collecting points, each with a filter, which join before re-entering the heating unit.
How important is the return air vent?
Your AC’s return air vent is a critical component of an HVAC system and serves several purposes. Not only do return air vents maintain your home’s air pressure and filter out debris, they can also serve to save you on energy costs and expenses, which is important here in hot and humid Gainesville, Fla.
Can flexible duct be used for return air?
Flex duct can be used for return air, but there are some conditions for its use in this application. Flex duct may have to be insulated for use as a return duct, but that is up to the discretion and requirements of the individual installing the duct system.
Does every room need a cold air return?
While it is a myth that air return grilles are required in each and every room in the house, it is definitely necessary to have more than one of these grilles installed at strategic places in the house. Likewise, you can also install these in rooms that have a high footfall or usage in the house.
How do you seal a wall cavity return?
I recommend sealing at least the first 6 feet on either side of all wall cavities used as a return. You can also use a smoak pen while the air handler is running to locate the leaks. You can seal these area with expanding foam or caulk.
How much does it cost to install a return air vent?
Cost of Return Air Plenums Return Air Plenums Costs Zip Code Basic Best Return Air Plenums – Material Prices $50.00 – $60.00 $95.00 – $105.00 Return Air Plenums – Installation Cost $100.25 – $100.35 $150.00 – $200.00 Return Air Plenums – Total $150.25 – $160.35 $245.00 – $305.00.
How does a return duct work?
Return air ducts draw air out of each room through a separate air vent and convey it back to the central unit to be reheated or cooled. The entire air distribution system is a closed loop, continuously recirculating the same volume of air throughout the house.
Can a return air duct be too big?
Can an air return be too big? No, an air return cannot be too big, except in extreme cases where a closed room is temporarily under negative air pressure. Return vents maintain air pressure, filter out debris, and are critical to the efficient operation of any HVAC system.
How many cold air return vents do you need?
Having several return vents (ideally one in every room, but even two or three is better than just one) creates consistent air pressure. If you have one return vent, your home is fine. Keep the doors to each room open so air can properly circulate.
How many return vents should a house have?
Generally speaking, you should only need one return air vent per room in your home. However, you may need additional air vents for larger sized rooms.
What happens if you block a return air vent?
Blocking air return vents causes your system to work harder, as there is less air flow to move the air back to the furnace. This continued strain on the HVAC system can lead to a decrease in performance and more HVAC repairs down the road.
Where do return vents go?
The best location of the return vents depends on whether the system is heating or cooling the air. If it’s cooling, the return vents should be near the ceiling, where the warm air collects, but if it’s heating, the return vents should draw cool air from the floors.
Should return air vents be high or low?
For optimal efficiency, it’s ideal to have return registers installed. To ensure efficiency during the cooling season, your home should have high registers. High return registers draw hot air that rises to the ceiling back into the system to repeat the cooling cycle.
What happens if ductwork is undersized?
Ducts that are undersized will increase the static pressure, which will result in excessive noise as air moves through the system. It is often loud enough to be distracting, so it will not be difficult to overlook and should be addressed, as undersized ducts overwork the heating unit.
What is the max recommended length of flexible duct?
Flexible air connectors which are listed to UL 181 are allowed by the standard in lengths up to 14 feet. This product is specifically evaluated for the maximum length up to 14 feet, and the manufacturer’s installation instructions are reviewed to ensure proper installation up to this length.
Can I put furniture in front of a return vent?
Most people would tell you, no, you cannot put furniture in front of an air return vent. For example, you can’t place a couch or chair or any piece of furniture that has a back into it in front of a return air vent because it will block all airflow into the return air vent.
Is it OK to block a cold air return?
Consequences. Restricting the airflow in the air handler or blower contributes to premature system problems, which can be serious. In the heating cycle, blocked cold air returns can cause the heat exchanger inside the blower compartment to store too much heat and eventually crack.
