Table of Contents
How much does it cost to install recessed lighting in basement?
Recessed Lighting Cost Expect to pay between $100 to $480 per fixture, or $360 on average, when having recessed lighting installed by a pro. At the average price, the project runs about $2,160 for six fixtures. The total varies depending on the type of housing, trim, and bulbs you select.
Where should recessed lights be placed in basement?
Recessed lighting layout for basements If your basement is 100 square meters (or 1076 square feet), and you’re using LED recessed lights, you’ll likely require about 15 lights (100 square meters x 150 lux =15,000 lumens). To avoid casting shadows, place your recessed lights at least 3 feet from your basement walls.
Can I install recessed lighting myself?
If you have a nearby power source, you can easily install recessed lights by yourself. Bringing in a power source adds some time to the project, but this can be accomplished by wiring your own circuit or hiring an electrician.
How hard is it to add recessed lighting?
Recessed lighting is easiest to install during new construction, but can be retrofitted into existing ceilings. If you don’t have complete access to the ceiling joists, you can still install recessed lighting without digging into too much drywall.
How much does it cost to install 4 recessed lights?
Recessed lighting cost Number of cans Existing ceiling New construction 1 $125 – $300 $65 – $175 2 $250 – $600 $130 – $350 4 $450 – $1,100 $260 – $700 6 $700 – $1,650 $390 – $1,000.
How far apart should 6 inch recessed lights be in a basement?
If a 6-inch light has a spacing criteria of 1.5 and the ceiling height is 8 feet, the maximum space between each light should be 12 feet. This formula is critical for lighting a space because if the lights are too far apart, they will look like spotlights with big shadows between each other.
How many recessed lights do I need in my basement?
The number of recessed lights in your basement will depend on the overall size and shape. Our designers use a general rule that one recessed light will cover about 70 square feet. When determining how many lights will be needed it is also good to think about where the lights will be placed.
How far off the wall should recessed lights be?
If you plan to illuminate an entire wall or accent particular architectural features or pieces of art, the rule of thumb is to place your recessed light fixtures between 1.5 feet and 3 feet from the wall. If your fixtures are fixed, they should be placed a bit closer to the wall.
Does recessed lighting add value to a house?
Does recessed lighting add home value? Recessed lighting can absolutely add home value of you take the time to place them correctly and use the right light temperature for the room. There are also ways to make recessed lighting more energy efficient which is not a bad additional benefit.
How many can lights on one switch?
The main limitation on the number of recessed lights that a single switch can control is the rating of the circuit breaker controlling the circuit. Each incandescent or halogen 60-watt bulb draws around 1/2 amp, and therefore, standard lighting with a 15amp breaker can manage 30 lights.
Do you need GFCI in basement?
GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
How do I run Romex in my basement?
Running Romex Wire in Basement You will have to drill a hole in the floor plate (attic) and roof or wall plate (basement) to run the wire. Make sure it is in the same wall cavity as the outlet you are trying to run the Romex to, since you can’t leave it exposed. To run the wire through this hole, use a coat hanger.
How do you run electrical wire in an unfinished basement?
Where cable is run at angles with joists in unfinished basements and crawl spaces, it shall be permissible to secure cables not smaller than two 6 AWG or three 8 AWG conductors directly to the lower edges of the joists. Smaller cables shall be run either through bored holes in joists or on running boards.
Are recessed lights out of style?
Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.
How do you install recessed lights?
A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
What is the difference between can lights and recessed lights?
Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling.
How much should an electrician charge for recessed lighting?
The cost for an electrician to install recessed can or canless LED lights will generally be between $200 and $250 per fixture. Professionals charge at a rate of $85 to $105 per hour and each installation takes approximately 2 to 2.5 hours.7 days ago.
How many recessed lights do I need?
A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination. This is an important rule to keep in mind when you are going to rely exclusively on recessed ceiling lights to illuminate your kitchen.
