Table of Contents
Instructions Measure and Mark the First Trim Piece. Miter-Cut the First Molding Piece. Test-Fit the First Piece. Cut the Second Piece. Test-Fit the Second Piece. Nail the First Two Pieces, and Continue. Create a Return Piece to Finish the Ends. Measure and Mark the Return Piece.
How do you attach quarter-round to trim?
Use the nailer or hammer and nails to attach the molding to the baseboard. Be sure you hold the quarter round tight against both the baseboard and floor for a tight fit. To hand-nail molding, drive each nail almost flush with the quarter round, then use the nail set to sink the head beneath the surface.
How do you install quarter-round without a nail gun?
How to install quarter round without a nail gun but with a hammer Step 1: Sweep dirt and debris. Step 2: Lay the quarter round flush against the baseboard. Step 3: Nail it! Step 4: Continue nailing. Step 5: Install more counter-rounds.
Can you glue quarter round?
A: Quarter-round should be nailed to the base boards only. It is intended to hide gaps between the base and floor. It should also permit a little movement in the flooring. Plus, it absorbs the impact of feet and furniture legs, so you may want to replace it sometime—thus, don’t glue it.
What nails do you use to install quarter round?
Attaching Quarter Round Because it’s finish trim, install quarter round with finish nails, which have smaller heads than standard nails. A finish nail gun, fitted with 1.5- or 2-inch finish nails, works well. You can also drive finish nails the old-fashioned way — with a hammer.
How do you install quarter round without baseboard?
Do not try to drive the nail all the way in with a hammer; you can easily make the wall, floor, or molding. Use a “nail set” (punch) with the hammer to sink the nail head just below the surface. A dab of spackle or wood putty will make the holes disappear.
What kind of Nailer do you use for quarter round?
The preferred tool for nailing shoe molding or quarter-round is an electric finish or brad nailer. This tool will automatically set or recess small finish nails, and can greatly speed up your work.
Should quarter round touch the floor?
It should match the flooring or match the baseboards. Buy bare wood quarter round and stain it to match hardwood floors. You could also buy primed quarter round, which is flat white, and paint it with semi-gloss paint to match the baseboard.
Can you hammer in quarter round?
Hammer the nail through the quarter-round and into the baseboard with a hammer. The finishing nail is thin enough to not split the quarter-round and long enough to anchor the molding.
Can you put up trim without a nail gun?
Your local big-box hardware store carries molding in all different styles, and they’ll cut it down for you to the exact sizes you need. Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun.
Is shoe molding the same as quarter round?
Quarter round is another moulding style typically paired with baseboards to cover up gaps and imperfections between the base and the floor. As such, it essentially has the same purpose as shoe moulding. However, this style of moulding is always shaped like a quarter of a circle, hence the name.
Can I use 16 gauge nails for quarter round?
They work well on birdhouses and other thin cuts of wood. Brads are excellent for trim work, including narrow trim around windows or doors, shoe moulding and quarter-round moulding. Finish nails are versatile nails with a 15- or 16-gauge diameter. They’re designed for thicker cuts of wood.
Do you paint quarter round before installing?
Many experts say that it’s wise to paint the trim before you install it. You can easily use a paint roller or spray painter to paint trim before installing it. The advantage of this approach is that you won’t have to worry about getting any of it on the wall, floor, or surrounding area. You simply paint and go.
Can quarter round be used as baseboard?
quarter round. If you’ve been looking at baseboard finishing trim, you’ve probably discovered quarter-round, too. While quarter-round can be installed along the bottom of baseboard, trim carpenters and homeowners tend to prefer the sleeker look of shoe molding, which is taller and narrower than its curved counterpart.
What is the difference between a brad nailer and a pin nailer?
For starters, brad nailers use a much larger 18 gauge nail. This nail has a much larger diameter head, which is why a brad nailer leaves a visible nail hold that must be covered with putty. Pin nailers, on the other hand, use a smaller 23 gauge nail.
What is the most versatile nail gun?
16-gauge nails are the most versatile size, so a 16-gauge nail gun is a great option if you need it for many different projects. 15-gauge nails are most often used for installing thick trim. 18-gauge and higher-gauge nail guns are best used for fine detail work, furniture repair and thin trim work.
