QA

Question: How To Install Pex Tubing

Can I install PEX myself?

No. You can install PEX fittings supply just like you would other pipe, with main lines and branches to each fixture. But you lose a lot of the benefits of PEX with this system since it requires so many fittings. Then make short runs of one-half inch PEX water line tubing to each fixture.

How do you install a PEX water line?

Cut the PEX tubing. Slide the PEX crimp ring and over the tubing approximately 2″ past the end. Fully insert the PEX fitting into the PEX tubing so that the fitting’s shoulder touches the tubing. Position the PEX crimp ring 1/4”-1/8” from the end of the tubing. Open the PEX crimp tool’s jaws.

What is the best way to connect PEX tubing?

The most common connection method used in PEX installation is the “Crimp” method. This process involves sliding a ribbed fitting into the PEX tube and crimping a seal ring around the connection point. These rings are typically made of copper, but may be found in plastic as well as brass.

Why is PEX plumbing bad?

Potential chemical leaching is another downside of PEX piping. Due to its chemical composition, the PEX pipe material may leach toxic chemicals including bisphenol (BPA), MTBE, tertiary butyl alcohol (TBA), and others.

How long does PEX pipe last?

Additionally, long-term testing programs on PEX have shown that it has a potential lifespan of more than 100 years. So, while copper systems may have to be re-piped every few years or decades due to corrosion and pinhole leaks, a PEX system can last 10 times longer — or more.

Where is PEX not allowed?

PEX can’t be installed in high heat areas. You can’t install PEX in high heat areas like near recessed lighting. This also means you can’t connect PEX directly to a hot water heater, but you can use a connecting material to do this.

Is PEX pipe safe for drinking water?

The inner pipe for drinking water is made of a plastic called cross-linked polyethylene (PEX). There are no health risks associated with drinking water from PEX pipes. A few types of PEX-pipe may cause prolonged undesirable taste and odour if the water remains in pipes over time.

Can I use blue PEX for hot water?

PEX without an oxygen barrier is designed primarily for use in potable water plumbing systems. The color of PEX does not change any of the tubing’s ratings. There would be no problem, for example, using blue PEX for hot water lines or red PEX for cold water lines.

Which PEX connection is best?

PEX-A, which has the most flexible tubing and best freeze- and kink resistance, is ideal for use with kitchen and bath fixtures. PEX-B is slightly less flexible and less freeze-resistant.

Is PEX pipe good for plumbing?

All this makes PEX an excellent piping material for hot and cold water systems, especially since it is flexible and well adapted for temperatures below freezing all the way up to 200 degrees Fahrenheit. PEX is easy for plumbers to install and has fewer joints, bringing your costs down.

What size PEX is used in homes?

PEX tubes range in diameter from 3/8-inch to 1-inch for residential applications. For adequate water flow, it’s a good idea to install 1/2-inch or 3/4-inch PEX for your main lines. The standard when replacing old water supply lines with PEX is to use the same size.

Is it better to crimp or clamp PEX?

If you are looking for a fast and more secure connection that will stand the test of time, crimp tools are your better option. But if you want more flexibility without working more, go for PEX clamps.

What is better crimp or cinch?

The stainless steel Cinch Clamps are stronger than the copper Crimp Rings. I know this from personal experience after working with frozen water lines. When the fitted connection freezes with water in the line it will cause the copper Crimp Ring to expand just enough to cause a leak when it thaws.

Can you crimp PEX twice?

Answer: Tech consensus from Sharkbite reps is that crimping more than once may be acceptable so long as the gauge tool fits well in the GO spot but still does not in the NO GO spot (meaing you did not overcrimp).

Is PEX safe for drinking water 2021?

With a plumbing-pipe offering in sizes up to 3 inches, PEX is challenging traditional copper and CPVC materials for domestic water applications. This provides confirmation the pipe does not leach harmful substances into drinking water and is safe for potable systems in healthcare facilities.

Can mice chew through PEX pipe?

Mice and rats will chew through anything they can, including plastic, so PEX tubing is at just as much risk as the plastic-coated wiring in a car or an HVAC unit. While all rodent damage can be expensive, if rodents chew through a home’s PEX water pipes, the result can be disastrous.

Why is PEX banned in California?

PEX was banned in California due to some concerns about toxic materials leaking through the pipe and into water. Through various national laboratory tests, PEX has proven to be completely safe and durable. It is now legal in California and even included in principal plumbing codes.

Is PEX or copper better?

We generally belive that Plumbing PEX Tubing is much better than Copper for most, if not all, plumbing systems. PEX Tubing is much more resistant to freeze-breakage than copper or rigid plastic pipe. PEX Tubing is cheaper because it takes much less labor to install. PEX Tubing is quickly becoming the industry standard.

Which is better PEX or copper piping?

Copper Pipe Lifespan. PEX pipe is not only cheaper than copper but more durable too. PEX is immune to corrosion and mineral build-up, and it’s not affected by electrolysis, which can cause small pinhole leaks in copper piping. PEX pipe is more resistant to bursting in freezing conditions than metal piping.

Is it necessary to insulate PEX piping?

Does PEX Pipe Need To Be Insulated? Yes, although PEX pipes can withstand freezing temperatures better than other pipe materials – but they are not freeze proof! If the temperature drops below 20 degrees Fahrenheit your pipes have a very good chance of freezing.