Table of Contents
Is it hard to install a over the range microwave?
Installing an over-the-range microwave oven is often easier than you think. If you are simply replacing an existing vent hood or older microwave with a new oven, you can install it easily enough with common tools. Attach the ductwork and plug in the oven, and you’re done.
How do you install an over the range microwave?
Project Toolbar Install a Vent for the Microwave. Install an Outlet Inside the Cabinet. Position the Microwave Fan. Tape Up the Mounting Template. Attach the Microwave’s Mounting Plate. Hang the Microwave Over the Range. Bolt the Microwave in Place.
How much does it cost to install over the range microwave?
Over-the-range microwave installation costs $100 to $300 for a standard replacement. The average cost of built-in microwave installation is $220 to $580. A handyman or electrician charges $50 to $100 per hour for labor. A new microwave costs $100 to $600.Microwave installation cost. National average cost $150 Average range $100 to $400.
Do all over the range microwaves install the same?
All mounting kits are not the same. They are specifically designed by the manufacturer for the model. Mounting kits are provided when you purchase the above range microwave or you can purchase one separately. The kits must vary in their configuration to properly accommodate hanging the microwave securely.
Do Over the range microwaves have to be vented?
There is no requirement that your Over The Range (OTR) Microwave be vented to the outdoors. All OTR microwave ovens can be set up to either allow the fan to recirculate the air back into the kitchen or be vented to the outdoors.
Does over range microwave need dedicated circuit?
Microwave ovens often demand dedicated circuitry, but this isn’t always a necessity. The National Electrical Code requires it for all fixed equipment, so a circuit must be set aside for any built-in oven. Generally, any equipment that runs on 220-volt power must have its own circuit.
How do you mount a microwave on a tile wall?
How to Install Microwave Brackets Around a Tile Backsplash Locate the wall studs behind the tile. Measure the wall space over the stove, usually between two low cabinets, and find the center. Place a 5/8-inch carbide-tipped masonry drill bit into your drill. Change the bit to a 3/16-inch carbide bit.
Can you mount a regular microwave over stove?
You can mount a microwave oven, even if it has a counter-top design. Moving a counter-top microwave oven to a mount in your kitchen frees counter space, giving you more room for kitchen work. The kit includes a mounting plate that attaches to the bottom of a cabinet, letting the microwave oven hang above the counter.
Will Lowes install over range microwave?
Our professional installers will take care of your dishwasher, wall oven, cooktop, gas range, gas dryer and over-the-range microwave installation. Just connect with a Lowe’s associate and let them know what’s needed.
Can you replace a microwave with a vent hood?
Can you replace a microwave with a range hood? Yes! Many people replace their over the range microwave with a ducted or ductless range hood. Range hoods are the much more flexible and versatile option when it comes to ventilating your cook space, compared to microwave hoods.
How far should over the range microwave be from stove?
The National Kitchen and Bath Association recommends that the bottom of the microwave should be no higher than 54 inches above the floor, which would allow for 18 inches of clearance between the microwave and the typical cooktop height of 36 inches. Some manufacturers allow smaller clearances.
Can I use old mounting plate for new microwave?
If your new microwave is the same brand as the old one, you may be able to reuse the existing mounting bracket.
How do you tell if your microwave is vented outside?
Check your cabinet above the microwave for a duct that directs exhaust outside your home if your microwave contains intake vents on the bottom of it. The vent is sometimes connected to the back wall behind the device instead of going through the cabinet above the microwave if it’s vented to the outside of your abode.
How much room does a microwave vent need?
It depends on the model or manufacturer. Nevertheless, a minimum of three inches of space on all sides of the oven will provide enough clearance. Leave three inches of space between the walls and the top, sides, and rear of the microwave oven.
Does a built in microwave need a vent?
Adequate ventilation, especially if the microwave is built into a wall of cabinetry, is a must. If you have your heart set on a cabinet-wall location but don’t have deep enough cabinets, the undercabinet shelf makes a great alternative.
Can a microwave be plugged into a regular outlet?
You can plug a microwave into any outlet. The appliance doesn’t require a special receptacle. It doesn’t need GFCI protection either. Though, AFCI protection is recommended.
Can I use an extension cord for my microwave?
We strongly recommend that an extension cord not be used with a microwave due to potential safety hazards under certain conditions. Your microwave should be plugged into its own properly grounded, dedicated electrical outlet to prevent the flickering of the lights, blowing of a fuse or tripping of a circuit breaker.
Do you need 20 amp outlet for microwave?
The microwave oven needs a dedicated 20-amp, the 120/125-volt circuit to feed it. This will require 12/2 NM wire with a ground. Microwave ovens come in different varieties and sizes. Some are countertop models, and other microwaves mount above the stove.
