Table of Contents
Can plantation shutters be installed on the outside of the window?
When fitting plantation shutters, you can install them as either an inside or outside mount. Inside mount fits inside the recessed depth of a window opening.
Can you inside Mount plantation shutters?
Inside mount is a popular choice if your window is deep enough. Inside mount shutters fit inside the window opening and can be pushed back toward the glass for very deep windows, or they can be pulled forward to be flush with the wall.
What is an outside mount?
What is an Outside Mount? An outside mount is when blinds or shades are installed on the wall above the window or directly on the window trim. Blinds or shades are made larger than the window opening for complete coverage.
Can you have plantation shutters with tilt in windows?
There are specialty frames that can be used when installing plantation shutters that allow for tilt in window operation. They are called L frames, “tilt-in” Z frames, or you can use a deco frame. Given you have molding around your windows, you can have a qualified shutter dealer pick the right frame for you.
How do you hang California shutters?
Step 1 – Measure Your Window. The first step in the process is to simply measure you window. Step 2 – Use Filler Strips If Necessary. Step 3 – Measure Your Shutters & Install Strips. Step 4 – Mount Your Shutters. Step 5 – Check The Alignment. Step 6 – Install Hardware.
How should shutters be hung?
When open, shutters should be located tight to the window covering all or part of the window casing and projecting outward at the window edge. Architecturally, it is not necessary for a feature to actually be functional; however, it must always appear functional.
Can you install plantation shutters without a frame?
A panels-only installation can work here, as it allows the panels to fully open without a frame interfering with the handle or locks, as long as there is enough depth available to mount the hinges directly to your window casing.
Are plantation shutters hinged?
Hinged panels are the most popular choice as they’re not only used on windows, but they can also be added to doorway openings. This will depend on the material type and application of each individual opening. Minimum height for hinged configurations is 350mm; maximum is 2900mm.
How do you use shutter clips?
Push a shutter clip partially onto the ribs at each corner of the shutter with. Hold the shutter against the mounting surface in the position where it will be attached. After the Shutter-Clips are in position and fastened to the. Read all of Step 4 and view Figure 4 before installing Shutter-Clips.
Can you have shutters without a recess?
If there is no recess and your Shutters will simply be fitted over a window frame, you will need to add the frame width to your measurements. Take *3 measurements from the outside edge of your window frame and choose the largest width.
How deep are plantation shutters?
A window frame depth of 60mm is required for the Shutters to sit flush and operate effectively; if there are obstructions such as window winders or handles there needs to be 60mm depth from that obstruction. A minimum depth of 30mm is required, however this will result in the Shutters protruding from the recess.
Can you put shutters on any window?
The great thing about shutters is that they are really flexible. They can fit any window in your home, both inside or externally, as well as being perfect for doors, conservatories and outbuildings.
What is the difference between inside Mount and outside mount?
As opposed to inside mount when the coverings are mounted inside the window frame, outside mount is mounted on the wall above the window and directly on the trim. Because of this the blinds or shades will need to be wider than your window opening.
Should you caulk around plantation shutters?
When installing, we finish with caulking around the perimeter of the frame to prevent any light gap and give the shutter a finished look.
Can you put shutters on windows that open inwards?
Outside Recess If your windows open inwards, or in situations where there is little or no depth in your window recess, this type of install is ideal. Shutters will still fold back, against your wall.
Can I have shutters if my windows open inwards?
When your windows open inwards, it will restrict where you can fit the shutters. If you want to open the windows you would need to use a Deco frame and fit the shutters on the outside of the recess. Shutters can be hung inside the battens, this allows you to shape the battens to suit the window.
Do plantation shutters work with double hung windows?
Plantation Shutters on double hung windows are a great way to provide both. Plantation shutters are made from slats or louvres of wood, metal or glass, and can vary in width depending on what you need.
What are double hung plantation shutters?
Double-hung plantation shutters give your window display a little something extra. Instead of tall, two-panel shutters, double-hung plantation shutters (also called tier-on-tier shutters) are displayed as two sets of shutters stacked atop one another for a more versatile shading effect.
