Table of Contents
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you support a heavy fireplace mantel?
The mantel needs to anchor to the studs in the wall above the fireplace. Drive 1/2- or 3/4-inch rebar rods or lag screws into pilot holes drilled into the studs. For best support, drive them all the way through the stud. Place one rod or screw in each stud behind the mantel.
How are fireplace mantels attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. A rubber mallet can also be used to help ease the mantel out of position if it’s stuck.
How do you put a wood mantel on a stone fireplace?
How to hang a wood mantel on stone fireplace Drill a hole in the stone fireplace using a mason drill bit. Cut the rebar to size. Fill hole with Fuz It (liquid nail) Insert the rebar into the hole on the stone and hold in place to allow liquid nail to grab rod. Allow to dry for 48 hours before hanging mantel.
How do you secure a wood mantel to brick?
Modern Timber Craft says to insert a lag bolt into each sleeve and tighten it with a screwdriver or drill until it is secure. Then, use an angle grinder to remove the head of each bolt. If a different set of hardware is provided with your mantel, anchor the hardware to the brick using screws in the inserted sleeves.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How much weight can my mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
How thick are mantels?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
Do fireplaces need a mantel?
Do You Need A Fireplace Mantel? A fireplace does not need to be furnished with a mantel, but a mantel can enhance the look of a fireplace either as part of fireplace surround or as a standalone mantel shelf.
Can you drill into stone fireplace?
All in all, drilling to masonry is completely achievable for a do it yourself-er. I definitely think drilling into brick/stone is easier than concrete but you can do it!Sep 28, 2021.
How high do you mount a fireplace mantel?
Mantel Height: We recommend installing the mantel 4.5′ from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
What is the best way to drill into brick?
Begin by drilling a pilot hole using a small masonry bit. Then, attach the larger bit and drill again to make a bigger hole. Make sure the drill is perpendicular to the brick wall. Drilling through brick and mortar places stress on the drill, causing it to heat up.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
What is the best adhesive for brick?
There are only a couple of glues that are rated strong enough to use with brick: Gorilla Glue and Rhino Glue.
How do you install a heavy wood mantel on a brick fireplace?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
Should you drill into brick or mortar?
We recommend drilling into the mortar instead of the brick for a few reasons. Drilling directly into brick is more difficult than drilling into mortar and runs the risk of damaging the brick. It is also easier to repair mortar if you drill into the wrong location or decide to remove your decorative item.
How high should mantle be with TV above?
The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.
How high is too high for a mantel?
A mantel that is at least 12 inches above the opening of the fireplace should be high enough away from the flames to keep you, your family, and your house safe.
