Table of Contents
How do you install laminate flooring for beginners?
When installing laminate flooring where do you start?
Always start hardwood flooring along the most prominent and noticeable wall in the room. This way, if the room is out of square, the crooked cut will be hidden under the cabinet’s toe kick. In order to keep the floor straight and square, start laying the laminate away from the wall because the wall may not be straight.
Do you cut the tongue off the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. If it is too short, cut a new plank in half and use one half to start the second row.
Do I need underlayment for laminate flooring?
Yes. Underlayment for laminate flooring provides proper support, stability, noise reduction and helps the click lock system to provide a structurally sound floor.
What do you put under laminate flooring?
What Is Laminate Underlayment? Laminate underlayment is a soft pad that is installed under laminate flooring. The underlayment helps the laminate planks lay smoother, connect better, and for the flooring to feel slightly softer underfoot.
Does it matter which way you lay laminate flooring?
In what direction should you lay a laminate floor? In most cases, you should lay your laminate flooring parallel to the longest side of the room or your home. This will create a more natural flow and will accentuate the length of the room better.
How do I make sure my first row of floor is straight?
Snap a chalk line down the middle, measure from that line to within a few inches of the starting wall, and snap a second line parallel to the first. Align your first piece with the second line. Then every couple of rows, measure to make sure you are still parallel with the first chalk line.
What is the tongue side of laminate flooring?
The tongue on laminate flooring is the small flat edge on one side of the board, this is the top edge that is going to angle and lock into the bottom side of another board.
Do I need to cut laminate tongue?
The tongue is the side that you will want to place against the wall as you start your laminate-flooring installation. The tongue against the wall should be removed.
Can you put laminate flooring down without underlayment?
Some laminate flooring planks come with the underlayment attached to each plank. Underlayment is not optional. If your laminate planks don’t have it already attached, we recommend that you buy rolls of underlayment on which to install your laminate floor.
What happens if you dont use underlayment?
If the subfloor in your home or property is uneven, then your laminate floor could move and shift if it doesn’t have an underlayment for support. As a result, the floor will be more prone to wear-and-tear and could even warp. The more stability, the less likely you’ll have to pay out of pocket for costly repairs.
What type of flooring does not need underlayment?
However, you’ll want to use one in every other application including covering existing hardwood floors, vinyl flooring that isn’t cushioned, and concrete floors. You also do not need an underlayment if your vinyl plank flooring has underlayment installed, however, you may need a vapor barrier.
What is the best underlay to use with laminate flooring?
Adding a damp proof membrane can trap moisture, subsequently damaging your laminate. And if your subfloor is made from plywood, a fibreboard or foam laminate underlay – without a vapour barrier – is usually a better option.
Do you need plywood under laminate flooring?
Moisture protection will not have any benefit to laminate flooring on plywood as most plywood subfloors are usually installed on the main or second level of a house. If not, an underlayment with vapor barrier will block moisture from your flooring but not the plywood subfloor enabling rot.
Do you lay laminate flooring vertically or horizontally?
You can lay your flooring either horizontally or vertically. Vertically will elongate a room and works great if pointing towards a window, as it will follow the natural light. Laying laminate flooring horizontally will can make a small room appear larger.
Can you lay laminate flooring backwards?
Generally speaking, you can install any type of vinyl plank flooring backward. It may still be possible to install laminate flooring from other manufacturers in reverse, but you need to be cautious that you don’t damage the tongue and groove while doing so.
How do I make sure my floor is square?
To do so, use a tape measure to determine the room’s length and width. Then multiply the length by the width to get your square footage. For instance, if the room is 12 feet wide and 12 feet long, you will need enough flooring for 144 square feet (12×12=144).
Which is tongue and groove?
Tongue and groove is a method of fitting similar objects together, edge to edge, used mainly with wood, in flooring, parquetry, panelling, and similar constructions. The tongue projects a little less than the depth of the groove. Two or more pieces thus fit together closely.
What is the tongue and groove on vinyl flooring?
Tongue and groove flooring has a tongue side that sticks out and a receiving groove side that is indented. Each floor board can slide into place because the tongue side can slide into the groove side. This allows a simple vertical movement to slide your floor boards together and into place during installation.
Do you nail the tongue or groove?
For tongue-and-groove flooring, drive a nail at a 45-degree angle through the tongue, then conceal it by engaging the groove of the next board. Be sure to countersink the nail — drive it slightly below the surface of the wood — to prevent interference in the joint.
Why does laminate flooring expand?
Why does the laminate floor expand and contract? Occasionally in any environment, temperature and humidity keep changing. Laminate flooring is prone to absorb moisture in the air, in such conditions making it expand. Temperature decrease makes your laminate floor contract reducing the space required.
How do you cut the tongue off of a hardwood floor?
For long cuts along the length of a board, the best tool is a table saw. And the second best would be a circular saw with a jig. If you don’t have plans for more projects like this, or simply need to save space, then the circular saw makes more sense.
Do you need to glue tongue and groove flooring?
The recommended glue for floating installation is Tongue and Groove engineered flooring glue. Glue placement is very important. The glue must be placed along the topside of the groove the full length of the grooved side and end.
Should you glue tongue and groove subfloor?
Many manufacturers recommend applying a continuous ¼-inch-diameter glue bead to framing members and using a serpentine pattern for supports that are 3½ inches or wider. Apply two beads of glue to panel joint locations; a 1/8-inch glue bead applied at the tongue-and-groove joints can further improve floor performance.
Which side is tongue which side is Groove?
On one long side of the plank you’ll find the tongue and on the other long side you’ll find the groove. The same is true on the short sides. So on each of the four sides you’ll either find a tongue or a groove, thus the name tongue and groove.
