Table of Contents
Where do you start when laying laminate flooring?
Begin the first row of flooring by placing the planks with the tongue side facing the wall. Install the second plank next to the first by aligning the tongue into the groove and press the plank down to snap it in place. When you come to the end of the first row, cut the length of plank needed to complete the row.
Do you need to put anything under laminate flooring?
Yes. Underlayment for laminate flooring provides proper support, stability, noise reduction and helps the click lock system to provide a structurally sound floor.
What is the proper way to install laminate flooring?
Follow these steps to install new laminate floors in your home: Step 1: Acclimate Your Planks and Prep the Subfloor. Step 2: Trim Door Jambs. Step 3: Install Underlayment. Step 4: Lay Your First Row of Laminate. Step 5: Continue Laying Planks. Step 6: Add Finishing Touches.
Is laminate flooring easy to install?
Laying laminate flooring is quick and easy and it can be fitted into most areas of any home (usually with the exception of wet rooms). Laminate flooring just clicks together without the need for any type of adhesive.
What side of laminate flooring should I start?
We recommend starting in the left corner of the longest wall in the room and to install the planks in the same direction as the main light source (e.g. the main window). Planks are always installed from left to right.
Do you have to cut the tongue of the first row of laminate?
Place the first plank with the tongue side towards the wall, being sure to allow 1/8″ for expansion. We recommend cutting off the tongue on this first row to avoid any problem with the expansion gap. If it is too short, cut a new plank in half and use one half to start the second row.
What happens if you don’t put underlayment under laminate flooring?
If the subfloor in your home or property is uneven, then your laminate floor could move and shift if it doesn’t have an underlayment for support. As a result, the floor will be more prone to wear-and-tear and could even warp. The more stability, the less likely you’ll have to pay out of pocket for costly repairs.
Can u use carpet underlay for laminate flooring?
Although re-using your underlay may be appealing, using a carpet underlay with laminate flooring will cause problems in the long run. If you install laminate on top of a carpet underlay, the floor will be too bouncy and spongy, which can damage the locking system and provide an uncomfortable feel.
Can you use felt paper under laminate flooring?
Floating floors can be installed over any existing hard floor surface, but should have an underlayment between the laminate flooring and the subfloor. You can buy laminate underlayment, but if you have a bunch of old roofing felt, it works just as well.
How soon can you walk on laminate flooring?
wait for the floor to cure Before you use your new floor or move into the room, make sure the floor is completely cured. Do not walk on the floor for 24 hours after installation. If you do, it will damage the installation, resulting in an uneven floor.
Can you lay laminate flooring without removing skirting boards?
It is definitely possible to achieve a professional-looking finish without removing your skirting boards and fitting laminate beading. But it is distinctly more difficult to create a smooth transition from wall to the floor in this way.
Do you need to stick laminate flooring?
Although gluing isn’t always necessary, it’s still a widespread installation method. Using glue for laminate flooring ensures your flooring remains durable. Because your laminate is glued directly to the subfloor, it makes it less likely for the planks to rise from moisture damage.
Do you need to glue laminate flooring?
If you’re not familiar with how laminate flooring is installed, you may wonder if it’s possible to glue laminate flooring down to the subfloor. Laminate flooring is not recommended to be glued down. Since it is a floating floor, it is meant to support itself via locking systems and have no connection to the subfloor.
Do you have to stagger laminate flooring?
Laminate flooring manufacturers often require their floors to be staggered anywhere between 6 to 12 inches, some manufacturers even want more. Don’t ever short-stagger your flooring, it is both not aesthetically pleasing, and can also bring up some of the same issues as not staggering the floor at all.
Which way do you lay laminate flooring in multiple rooms?
The best direction is based on the shape of your house. There is no right direction, but the more accepted rule is that the floor direction should run parallel to the longer walls, but long hallways are exempt from this rule.
What part of the room should you start laminate flooring?
Always start hardwood flooring along the most prominent and noticeable wall in the room. This way, if the room is out of square, the crooked cut will be hidden under the cabinet’s toe kick. In order to keep the floor straight and square, start laying the laminate away from the wall because the wall may not be straight.
Which saw is best for cutting laminate flooring?
A jigsaw is a real all-rounder when it comes to cutting laminate floors. It’s best used to cut out shapes from your board. For example, when you want to place boards around your toilet or maybe a pillar. Always use a fine toothed blade and have the saw blade spinning before you touch the board.
