Table of Contents
How do you hide the wires under-cabinet lighting?
One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet’s underside with staples. The wiring length itself should extend directly from the light to the wall.
Do you need an electrician to install recessed lighting?
Yes, you need (sic) to hire a licensed electrican to install recessed lights in a ceiling. Yes, a person with good knowledge and experience in electrical work is able to preform the work.
Do you need a junction box for a ceiling light?
If you’re wondering how you install a light fixture without an electrical box, the short answer is that you don’t. You can’t install a light fixture without a junction box, but the fact that there’s no box at the spot where you want to install the light doesn’t mean you can’t install the light.
Can I install recessed lighting myself?
If you have a nearby power source, you can easily install recessed lights by yourself. Bringing in a power source adds some time to the project, but this can be accomplished by wiring your own circuit or hiring an electrician.
Do you need a ground wire for light fixture?
Yes, if you have a metal light fixture your fixture needs to be grounded. The ground wire exits your junction box, but it is not attached to your junction box.
What are the 3 wires in a light fixture?
A standard box for a light fixture will have three wires, a white (neutral), black (current), and copper (ground.).
What wires go together on a light fixture?
One of the black and white wires goes to the light fixture. The other black and white wires are the electrical circuit for the switch. If the light can be turned on or off from switches at each side of the room, you’ll see a blue wire that connects the electrical circuits for three-way switches.
How much would an electrician charge to install a ceiling light?
Installing ceiling lights typically requires an hour or two per fixture, regardless of the fixture type. The installation cost therefore depends on the electrician’s hourly rate, resulting in a total installation cost between $90 and $230.
Do under cabinet lights go in front or back?
When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you’re standing or seated.
What kind of wire do you use for under cabinet lighting?
Although wire size ultimately depends on your light-fixture manufacturer’s specifications, 12-gauge wire is standard for most incandescent and fluorescent under-cabinet fixtures. A basic installation requires a 12-2 NM cable.
Where is the best placement for under cabinet lighting?
If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.
Why is recessed lighting bad?
Used properly, recessed lights are sleek, unobtrusive fixtures that can be good problem-solvers. Used improperly, they can waste electricity, provide poor lighting and cause your heating and cooling bills to go up. Kitchens are common places where recessed lighting fixtures are used.
How much does it cost to install recessed lighting in kitchen?
Recessed Lighting Cost Expect to pay between $100 to $480 per fixture, or $360 on average, when having recessed lighting installed by a pro. At the average price, the project runs about $2,160 for six fixtures. The total varies depending on the type of housing, trim, and bulbs you select.
Is recessed lighting worth it?
Recessed lighting definitely has some great advantages that make it a great choice for your next lighting installation. When it comes to interior design, it’s an unobtrusive, effective way to light your spaces with class. First of all, recessed lighting is perfect for low ceilings.
Do I have to use a junction box?
You’ll need a junction box if you can’t make the connections inside an existing electrical box. You should install the box with the opening facing out from the wall so all the wires inside are accessible. Like any electrical box, it should be installed so that the edge of the opening is flush with the wall.
Does a junction box have to be attached to a stud?
They don’t need to be fastened to a stud, so you can install them anywhere.
What is an electrical junction box used for?
What are Junction Boxes and What Are They Used For? A junction box is an enclosure that protects a connection (the junction) of two or more wires carrying electrical current. This level of protection is needed to prevent fires and to maintain solid, reliable connections that stay tight over many years.
How hard is it to add recessed lighting?
It is more difficult to install recessed lights than traditional types. The process involves a lot of cutting out holes that are of the same size. Putting them in the ceiling can be even more challenging than working along a wall.
How far apart should recessed lights be?
A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
