Table of Contents
Are shutters easy to install yourself?
Adding shutters to a house is an easy way to boost its curb appeal. Shutter installation is a straightforward project and, depending on how many windows you have, the job can be completed in an afternoon with the right tools and some basic DIY skills.
Can shutters be fitted to any window?
The great thing about shutters is that they are really flexible. They can fit any window in your home, both inside or externally, as well as being perfect for doors, conservatories and outbuildings.
Can I install plantation shutters myself?
Install. Installing shutters won’t take long, even if you’re a DIY novice. In fact, most of our customers fit their shutters within 60 minutes – and we’re here to help you. Simply select the type of window and the particular guide you need to download your Step By Step Installation Guide.
Where do you drill holes in shutters?
To help ensure proper alignment mark and predrill holes using a ¼” drill bit into the shutter before attaching it to the wall. With the shutter in location against the wall, drill through the shutter into the wall 2½” deep. Make sure you drill holes deep enough so the shutter fastener doesn’t bottom out.
How do interior shutters work?
Plantation shutters consist of a frame which is permanently attached to your window opening, and a shutter panel which is hinged inside the shutter frame. Since each shutter panel is hinged into the shutter frame, each can swing open completely by just pulling on the panel, which allows it to swing open.
How should shutters be hung?
When open, shutters should be located tight to the window covering all or part of the window casing and projecting outward at the window edge. Architecturally, it is not necessary for a feature to actually be functional; however, it must always appear functional.
Which direction do shutters go?
The correct installation of a fixed louver shutter should have the shutter louvers facing down and towards the back when the shutter is open (when it is not covering the window).
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
How much space do you need for shutters?
Shutter Width of Wide Windows It is advisable to select a width size divisible into the window width. Shutter size should be between 25-50% of the window width in order to remain aesthetically pleasing. Never install house shutters that are wider than the window.
How much do interior window shutters cost?
HomeGuide reports that wooden shutters, which are the most expensive (as well as the most durable and long-lasting) will cost you somewhere between $200 and $350. Faux shutters, meanwhile, run between $70 and $260 per window. At minimum, installing plantation shutters will cost you $390 and a maximum of $6,000.
What is the difference between plantation shutters and traditional shutters?
Unlike traditional shutters which have a limited range of materials and designs, plantation shutters offer a wide variety in colours, sizes, designs, and materials. Plantation shutters have wider louvers compared to the narrow and smaller louvers of traditional shutters.
Do plantation shutters make a room dark?
Because plantation shutters can be adjusted with rods to tilt the slats, they can be used to block out sunlight and make rooms dark! They can even be more effective than other types of window treatments because they are built into the window frame, so there are no gaps on the sides that could let sunlight in.
Do plantation shutters keep the heat out?
Energy Efficiency Plantation shutters are energy-efficient because they are installed in such a way that they seal right up against the window frame. In general, the inherent structure of Plantation shutters means that they are one of the best window coverings to keep heat out in the summer and cold out in the winter.
How long should shutter screws be?
They are standard 2 ½ inch steel screws with the heads painted to match your shutters.
How tall should shutters be?
It should look like the shutters could close inside the window opening. Standard vinyl shutters are available in the following heights: 35″, 39″, 43″, 47″, 51″, 55″, 59″, 63″, 67″, 71″. Window Width Shutter Width 16″ or smaller 7″ 17″ – 22″ 9″-10″ 23″ – 31″ 12″-14.5″ 32″ – 40″ 14.5″-16.25″-17.75″.
How do you attach shutters to stucco?
How to Install Vinyl Shutters on Stucco Measure and drill 1/4-inch holes in your shutter for your shutter locks or screws. Hold the shutter up next to the window in the location you desire. Drill through the stucco using a 1/4-inch masonry carbide drill bit. Hold the shutter over your holes.
How much smaller should blinds be than the window?
Not Adding Width To Outside Mount Blinds We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Can you open windows if you have shutters?
A common question or concern is how windows work when you’ve got shutters installed. For windows that crank out or windows that tilt in for cleaning, you can absolutely still open and operate your windows, but it will be important to select the correct type of mount for your shutters to avoid blocking these functions.
Should shutters close up or down?
Tilting the shutters all the way down is a good position to leave your shutters in if you’d prefer not to adjust them with the light. But if you want to maximise the light coming into the room without opening the louvres completely, tilt the shutters downwards to bring as much light into the room as possible.
Which way should plantation shutters close?
While you can rotate the slats to point downward, the fully flat closure will occur by pushing the slats closed in the upwards direction. This design provides you the optimum light blockage and privacy. No one on the outside of the home can peer in through the slats.
