Table of Contents
Can you add lights to an existing inground pool?
Technically, yes. You can add pool lights to your existing pool, but it might mean that your pool needs to be remodelled, which requires a considerable amount of work. If you have an older pool, it could be a good chance to combine your need for lights with the need for a pool refresh.
How do you add lights to an existing pool?
For those who truly want to light up the pool, you will need to set up a power source. We recommend a GFCI outlet, and you can mount the light transformer next to the outlet and plug it in. If that’s not possible, you’ll need to install a waterproof junction box on an existing power line.
Do all inground pools have lights?
Pools longer than 30′ will require two lights. The predominant pool light on the market today is LED, but fiber optic lighting as well as incandescent lighting are also available.
How much does it cost to add lights to a pool?
As this is being written, a full sized LED pool light usually cost between $450 and $650 installed. If you go for the smaller LED lights you’re looking at $300 to $500 installed. When you have full-size incandescent pool lights they are in the range of $450 to $650.
Can a pool light electrocute you?
You can get electrocuted by a pool light in a swimming pool. It can cause serious injury and even death. An experienced electrocution lawyer can help victims and families recover the pain and suffering compensation or wrongful death damages they are entitled to under the law.
Does a pool light need a transformer?
If your current pool light is a 120V pool light, then you’ll need to have an electrician install a transformer between the power source and the junction box. The Junction Box, or J-box as it’s sometimes called, is the point where the wires from the pool light meet the wires from the breaker box.
How deep should pool lights be?
Place lights at a uniform depth, between 9-12 inches below the waterline, throughout the pool. Possible exceptions would be if the lights need to be placed on a step or bench or extremely deep pools (see Pro Tip). Lights should be positioned 4 inches beneath the waterline.
How many lights should my pool have?
The number of lights you need depends on the size of your swimming pool. 15′ x 30′ pools only require one light. 20′ x 40′ pools require two lights. 20′ x 42′ pools and up require three or more lights.
Are LED pool lights worth it?
An LED light will save you roughly 75% on your energy usage compared to a comparable incandescent light. REMEMBER, that LED pool lights cost more, on average, than a simple incandescent light so your cost savings will not start till you recoup the additional money that you spent on the LED lights.
Can you put LED lights in a pool?
Plug the power supply’s attached cord into an outlet, and enjoy your LED pool lighting system! Refill your pool with water, but make sure to leave space between the water line and the lights.
Are pool lights worth it?
Pool lights are worth it because they provide the necessary lighting for a pool especially during the night, which prevents accidents because you can see every area of your pool. Moreover, they are considered a necessity most especially if you want to get maximum usage out of your pool.
Why are LED pool lights so expensive?
It costs a lot of money to have sales people to go to all the different pool store chains that must be covered in the bulb price. You aren’t paying for a better bulb, you are paying for expensive overhead and multiple mouths to feed when each bulb is sold.
What is a Nicheless pool light?
Nicheless lights do not use a wet niche and; therefore, do not require the added engineering detail, steel, or gunite that is typically used to install standard pool lights. For example, some manufacturers offer lighting products that can be installed in a standard 38.1 mm (1.5 in.)Mar 31, 2016.
Can I install pool lights?
When the pool water level reaches the light, the light ring and gasket can be installed. Then the vinyl inside the light ring is cut out, and the lamp can be installed into the light niche, with the light cord running out the back of the niche, to the power junction box.
How do you light a pool area?
Pool landscape lighting ideas for your backyard Light your water features with spotlights. Uplight or downlight trees and plants with spotlights or well lights. Light your paths with path lights and hardscape lights. Use floodlights to illuminate your patio and other high-traffic areas.
How long do pool lights Last?
Your pool lighting should give you few problems overall. Most incandescent bulbs will burn for 1,000 hours before bulb replacement is necessary. LED bulbs can burn for 25 years or more (or so they tell us).
