Table of Contents
How far apart should fence posts be for high tensile fence?
Most fence posts can be spaced 8 to 12 feet apart. While this is a general criteria, it doesn’t cover all scenarios. For instance, high tensile fence can have larger spacing, requiring line posts every 15 to 20 feet for field fence styles, and as much as 20-30 feet for high tensile barbed and smooth wire.
How tight should a high tensile fence be?
– Over-tensioning hi-tensile wire: Hi-tensile wire needs only between 150 to 200 pounds of tension. If you are used to putting up barbed wire, then you would normally put about 300 to 350 pounds of tension on it. So, don’t over tension hi-tensile wire. This is normally the last step in putting up your fence.
How high should fence be for cattle?
Fence height should be at least 48 inches high to prevent animals from climbing over the fence. Woven wire fence can be used with cattle provided there are several strands of barbed top wires used to prevent the cattle from rubbing the woven wire down.
What gauge is high tensile wire?
This wire is a barbless (smooth), single strand fence wire produced from a high tensile steel. The standard size is 12½ gauge with a minimum breaking strength of 1,350 pounds.
How do you start a high tensile fence?
Building High-Tensile Fence Dig holes for the corner posts. Set corner posts. Build braces. Attach insulator tubes to corner post. Unroll the wire. Lay out line posts. Attach the insulator tubes and wire on the second corner, before you walk (or drive) back to the first corner. Cut and attach wire on the first corner.
Does high tensile wire rust?
In recent years all of my new fence construction is with hi-tensile steel wire. Class 3 galvanized coating resists rust up to 3-times longer than traditional farm store wire.
Will high tensile fence keep goats in?
Fencing is the most critical factor in raising goats on pasture. Goats can be controlled with four to five strands of high-tensile electrified wire. The wire spacings can vary from 6 to 8 inches near the ground to 8 to 12 inches for the top strands.
How tight should electric fence wire be?
How tight should the wire be? For most applications, the wires shouldn’t sag between the posts. They should be kept off the ground and at a height that the animals aren’t inclined to jump over them. This doesn’t mean you have to remove every bit of sag and an inch or two won’t make much difference.
How far apart do you put fence posts for cattle?
Fence posts need to spaced 50-100 feet apart. Using the right energizer. They suggest 1 joule of output per mile of fence.
Is barbed wire necessary for cattle?
Not only does it keep the cattle in, but it can help keep predators out, protecting young calves. The only problem here is that cattle often need a little stronger deterrent. Adding a strand of electric wire or barbed wire at the top can give woven wire the boost it needs.
How far apart should t post be for field fence?
The typical spacing of posts is between 8′ and 12′. The distance should be determined by the type of fence and the amount of support that the fence needs in order to stay taught.
How strong is high tensile wire?
High tensile wire equates to a high carbon content, and will not stretch as much as low carbon wires. Typically used exclusively in barbed wire, 15 gauge high tensile wire is only going to stretch 1.5-2%, and will break at about 550 lbs., making barbed wire break at 1,100 lbs.
How many acres will 1000 feet of wire cover?
To Cover This Size Area You Need This Amount of Wire 1/2 Acre 600 Feet 1 Acre 1000 Feet 2 Acres 1300 Feet 3 Acres 1500 Feet.
Which is stronger 14 gauge or 16 gauge?
16ga steel is . 065” inches thick, that is about 1/16th of an inch thick. 14 gauge in comparison is . 083 inches thick which doesn’t sound like much except it is almost 30% thicker (27.6% to be exact).
What type of fencing is best for cattle?
Three basic fence types are best suited for cattle: traditional barbed wire, woven wire and high tensile smooth wire, says Ken Edwards, a longtime cattle owner and technical support manager with Red Brand-Keystone Steel & Wire.
What kind of wire do you use for an electric fence?
Most electric fences use 14 or 17 gauge wire depending on how long the fence is and what animal is being contained or repelled. Keep in mind that the lower the gauge of wire, the thicker the wire will be.
How far apart should fence posts be for woven wire?
Installing the Fence: Basics Spacing: Anchor posts should be at the corners or ends of the fence, and every 30- 50 feet throughout the length of it. T-posts should be every 10 feet.
How far apart should electric fence insulators be?
Electric Fence Post Installation Fencing parameters Spacing (feet) Electric 12-20 High-tensile, level terrain 30-90 High-tensile, difficult animals, rolling terrain 15-20 Poly tape and poly wire 12.
