Table of Contents
How do you install a floating mantle?
Here’s how to install a floating mantel!How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How are fireplace mantels attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. A rubber mallet can also be used to help ease the mantel out of position if it’s stuck.
How do you hang a heavy mantle on drywall?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
How do you secure a floating mantel?
Make sure those marks are level, centered and extend far enough to cover the mantel’s length. drill holes at each mark. Drill Sleeve Holes. Drill holes at each mark using a drill and 3/4″ masonry bit. insert lead sleeves into holes. Insert Sleeves. drive lag bolts. Drive Lag Bolts. install the mantle. Install Mantel.
How do I attach a solid mantle to the wall?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do you attach a mantel to a stud?
Installing Support Rods The mantel needs to anchor to the studs in the wall above the fireplace. Drive 1/2- or 3/4-inch rebar rods or lag screws into pilot holes drilled into the studs. For best support, drive them all the way through the stud. Place one rod or screw in each stud behind the mantel.
How heavy can a mantle be?
The maximum weight for all 60INCH MANTELS is 150 lbs. The maximum load for all 72 inch mantels is 180 lbs.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How do you attach a wood mantel to a brick fireplace?
Lift the mantel and position it in place, aligning the holes in the back of the mantel with the support rods. Push the mantel onto the rods until the back of the mantle is against the bricks. Gently tap with a small hammer and a small piece of wood if necessary to completely align the mantel next to the brick.
How is a mantle attached to a brick fireplace?
The mantel is lifted into its wall position by aligning the holes to the support rods. The mantel is pushed back into the rods and against the bricks. Secure attachment of a mantel to a brick fireplace is realized by tapping it in with a hammer and a scrap wood spacer.
How do you build a floating mantel on a brick fireplace?
How to build a floating mantel (or shelf): Prep your surface. For me, that meant staining our fireplace white beforehand. Create mantel support. Create a hollow box for your mantel. Finish the mantel. Attach your shelf support onto the brick. Fit your mantel onto the mantel support. Style your finished mantel!.
How high should a mantle be above the floor?
Mantel Height: We recommend installing the mantel 4.5′ from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
How wide should a floating mantel be?
Your mantel should be wider than your fireplace. Typically, a mantel should be a minimum of 3 inches past the firebox on each side. However, more can be better. The average mantel is approximately 6 inches wider than the fireplace on either side, and some can be even wider.
How far above the mantle should a TV be mounted?
The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.