Table of Contents
How To: Install Engineered Hardwood Flooring on Concrete Test the Humidity of the Concrete. Prepare the Floor and Let Planks Acclimate. Spread the Adhesive with a Notched Trowel. Laying Down the Flooring Planks. Apply Pressure to the Flooring. Wait and Finish (If Needed).
Is it better to glue or float an engineered wood floor?
If you are trying to decide between the two, then for engineered wood flooring floating is usually the best option as you can install it quickly and don’t have to worry about which glue to use and how long to wait for it to dry. If you are installing hardwood flooring then using glue may give you a more stable result.
Do I need a vapor barrier between concrete and wood flooring?
Do I need a vapor barrier for hardwood floors?” The answer is YES! Moisture can destroy hardwood flooring. It causes cupping, warping, and even mildew if not treated. You must install a moisture barrier to protect your flooring from water wicking up from below.
How level does concrete floor need to be for engineered hardwood?
Typically, the floor must be level and uniform within 3/16 inch every 10 feet. Check your wood flooring manufacturer’s recommendations and sand any high spots with a concrete grinder. Fill any low spots with a cementitious leveling compound following the manufacturer’s directions and allow it to dry before proceeding.
Can you put wood flooring directly on concrete?
If you have a concrete slab main floor or basement, you may be wondering if it’s possible to install hardwood flooring directly on top of the concrete. The short answer is yes.
Can you walk on engineered hardwood floors after installation?
Engineered hardwood flooring can resist warping from changes in temperature much better than solid hardwood flooring, so you only need to wait a day before walking on it.
Does engineered floor need expansion gap?
Although engineered hardwood floors can withstand changes in temperature and moisture better than solid wood floors, they still need an expansion gap to allow for small movements.
Can I float engineered wood over concrete?
A floating engineered hardwood is installed much like a laminate and can be floated over a variety of subfloors, including concrete, wood, tile and vinyl. Before you start piecing these planks together, you must prepare your room and the subfloor.
Do you need underlay for solid wood flooring on concrete?
It is important to mention that you do not need a wood floor underlay when you have a solid hardwood floor and that’s because it is not stable, hence it has to be installed mechanically to the concrete subfloor.
Do you put underlay under engineered wood flooring?
If you engineered floor has a click system, then it must be installed onto an underlay. All of our wood and laminate flooring underlay is suitable for timber sub-floor underlay, but ensure that you are using a concrete underlay if installing onto concrete.
What is a floating engineered wood floor?
Floating wood floors are thinner tongue and groove flooring sections that interlock together without any actual fasteners. Typically, this type of hardwood flooring is set up with a series of tongues and grooves so that they can be attached to one another.
What do you put between wood and concrete?
Anyplace where wood meets the ground or concrete, the lumber must be pressure treated. For additional moisture protection, a gasket or strip of closed-cell foam can be installed between the concrete foundation and the sill plate.
What do you put under wood on concrete?
Lay 6-mil polyethylene sheeting over the concrete to minimize moisture migration from the concrete up into the wood flooring. Then fasten 3/4-in. treated plywood to the concrete with concrete screws spaced every 16 in. Alternatively, screw rows of treated 1x4s to the concrete 16 in.
What is the best underlay for wood flooring on concrete?
Super Gold is the thickest underlay you can put under laminate or wood flooring. The main benefit of a thicker product is the warmth properties it has. It has a built in damp proof membrane so works great when laying on concrete floors for example kitchens and other downstairs rooms.
What is the cheapest way to level a concrete floor?
There are self-leveling coatings designed to fill gaps and cracks. You could also try using vinyl floor tiles to make the transition more gradual. Probably the easiest (and cheapest) thing to do would be to get a big diamond grinding wheel and bevel down the lip.
Can you put engineered hardwood in a basement?
Yes, you can install hardwood in a basement, as long as there is not a water nor moisture issue. If your basement is below grade (i.e. beneath the ground), then you need to use an engineered hardwood (rather than solid hardwood).
How do you attach wood to concrete without drilling?
Cut Nail. Using cut nails is an easy approach for attaching wooden items to concrete without a hammer drill. The cut nail has a square, tapered shape with a tip pa. These are driven through a board into the concrete underneath, much like nailing wood to the wood floor.
What goes under engineered wood flooring?
You must have a wood or plywood subfloor in order to staple or nail onto. Concrete or other hardboard type subfloor materials will not hold staples or nails. Staple/Nail down installation provides the best finished look as well, because the boards are “racked” together tight when hit with the nailer.
Do you glue engineered flooring?
Engineered hardwood floors can be glued or nailed into position, but they also have the option of being floated over an underlay. If you have a concrete subfloor, then you should glue your hardwood down, if you have a wooden subfloor then you can choose either method of installation.
Is engineered hardwood waterproof?
Is Engineered Hardwood Waterproof? All traditional engineered hardwood is not waterproof. A new engineered hardwood product has a vinyl core with a wooden top or outer wooden layer.
Which direction does engineered flooring expand?
As a result, when it comes to installing engineered wood flooring you must leave an expansion gap, otherwise you could come up against severe problems in the future. Expansion gaps should be left wherever the floor comes up against a fixed object, for example, next to a wall, a doorway or a heating pipe.
What is the best thickness for engineered wood flooring?
About Engineered Hardwood Thicknesses It is recommended to choose engineered wood flooring with an overall thickness of 3/4 inch to 5/8 inch. Breaking that down, the wear layer should measure 3/16 inch, and the core should have a 9- or 11-plywood (ply) thickness.
