Table of Contents
Where should Handles go on drawers?
DRAWERS. When it comes to cabinetry drawers — tab, edge or finger pulls should be installed to the top edge of the drawer. In most cases, for the best functionality long term, we recommend that the tab pulls be installed equally on center.
Where should cabinet pulls be placed?
For both upper and lower cabinets, the pulls should be installed vertically 2 ½ – 3 inches in from the corner of the door. For drawers, they should be installed horizontally in the center of the door. While there is no hard-set rule for the size of your pulls, consider using longer ones on larger drawers and cabinets.
Should kitchen handles be vertical or horizontal?
The universal rule is that handles are placed vertically on doors and horizontally on pull-out drawers. Stand in your new kitchen and hold your handles against the drawers and cabinet doors to try out different heights and positions for each of them.
How do you line up cabinet pulls?
One good rule of thumb is to line up a knob with the top of the bottom door rail. If you’re installing door pulls, line up the bottom of the pull with the top of the door rail. Always center them on the door stile.
Should I use knobs or pulls on kitchen cabinets?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. For any large door such as a pantry and any pull-out door (including pull-out base pantries or trash pull-outs), use a pull.
How do you measure for drawer pulls?
Place the drawer pull on a work surface with the threaded posts facing up. Measure from the center of the screw hole in one threaded post over to the center of the other screw hole with a tape measure. This is the measurement required when selecting replacement pulls.
How many pulls should a drawer have?
Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one. If a drawer is wide enough to need two knobs, they should be set about 1/6th of the drawer length from each end (roughly). Single pulls or knobs on drawers should be laterally centered and slightly higher than vertical center.
How long should Pulls be on cabinets?
While there is no set rule, we generally recommend that the pull length is approximately 1/3 of the cabinet or drawer width. Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter.
How do I choose a kitchen handle?
When choosing handles it is important to make sure they are good quality and are well designed. Think about how many times you open and close the cabinet doors and drawers in your kitchen. You will want your handles to be as comfortable as they are stylish. Test out the handles you intend to buy.
What handles go with Shaker cabinets?
The simplest way to adorn your Shaker cabinetry is to use only knobs on all the cabinet doors and drawers. To achieve a classic or vintage look, circular glass or ceramic knobs are most appropriate.
What size handles to use on kitchen cabinets?
There is no right or wrong size to choose, but we do recommend choosing pulls that have at least a 3-3/4″ center to center (the distance between the screw holes). This size looks pleasing on most cabinets, while still being large enough to grip comfortably. 5″ pulls are also an excellent choice.
How do you straighten crooked cabinet pulls?
How to fix it if your cabinet handles are installed wrong: Put wood filler in the incorrectly drilled holes, and let it dry overnight. Sand the door to get an even surface. Buy paint. Use a paint sprayer to spray the paint over the filled holes. Let it dry. Drill new holes in the right place!.
How do you fix an uneven door knob?
Push a little wood putty into each hole with your fingers. Put in enough to completely fill each hole to the surface of the cabinet, from front to back and pack it firmly by placing opposing thumbs on the front and back of the hole to squeeze it in tightly.
How do you decide between knobs and pulls?
Knobs have smaller profiles than handles, are less expensive, and can be used for both drawers and cabinets. They are slightly easier to install than pulls since you only need one screw to secure the knob to the surface. Pulls are larger than knobs, make more of a statement, and tend to be easier to grip.
Can you mix knobs and pulls on kitchen cabinets?
Yes. You can mix knobs and pulls. It’s recommended to use pulls for cabinets that are higher up and knobs for lower style cabinets. Lower drawers that slide are typically fitted with a pull handle.
Can you mix handles and knobs on kitchen cabinets?
Although it’s definitely possible to coordinate cabinet hardware in different finishes, it’s much easier and safer to mix different shapes of knobs and pulls in one matching finish.
What size pulls for 36 inch drawers?
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
How do you measure for new dresser pulls?
The Center-to-Center of any drawer pull is the distance between the center of one screw hole to the center of the other. Measuring the center-to-center of the drawer pull is key in determining what new hardware will fit and whether you’ll need to drill new mounting holes or fit into existing ones.
