Table of Contents
Where should closet rods be placed?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How far should closet rod be from shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How do you hang a closet rod on drywall?
To securely install a closet rod in drywall: Measure the size of the space where the closet rod will go. Buy a closet dowel rod and cut it to length. Choose a wall bracket that can be positioned so that you can screw it into wall studs. Mark the place where your first bracket will be installed. Drill pilot holes.
How do you hang a closet rod from the ceiling?
Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
How do you maximize a hanging space in a closet?
If most of your clothes are short hanging, add an extra closet rod to instantly double the amount of hanging space. Add-on, cascading and slim profile hangers are other good ways to save space. Finally, give yourself the benefit of drawers in your closet by using hanging sweater and hanging shoe organizers.
Does a closet rod have to be in a stud?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
Do closets usually have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
How thick should a closet rod be?
A closet-rod dowel is usually between 1 1/4 inches to 1 3/8 inches in diameter. This diameter allows for plenty of hanging strength. It resists breakage, and will not bend when properly supported.
What is the standard depth of a closet rod?
Opt for a closet rod depth of at least 12 inches. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet. Keep in mind that the average closet has a depth of 24 inches.
How deep should a hanger closet be?
Unless you are working with tiny baby garments, your hangers will require a closet with at least 22-inches of depth in order to swing freely on the rod. The rods must also be hung at prescribed distances from the floor and ceiling because they must accommodate the various lengths of clothing found in typical wardrobes.
How do you install drywall anchors?
How To: Use Drywall Anchors STEP 1: Choose the right drywall anchor. STEP 2: Twist the self-drilling wall anchor into drywall with moderate pressure. STEP 3: Turn the drywall anchor in until the lip is flush with the wall. STEP 4: Attach your rack or shelf to the wall by screwing into the drywall anchor.
How do you hang a dowel from the ceiling?
Using Bolts as Hangers Simply drill two 1/4-inch holes in a length of dowel and then mark holes the same distance apart in the shelf from which you want to hang the dowel. Drill holes in the shelf and insert carriage bolts. Affix the dowel to the ends of the bolts with 1/4-inch nuts.
What is the average hanging space per person?
Aim for a minimum of 2.4m of wall space per person (without additional bedroom furniture). Allocate 600mm for the widest items you wish to hang, plus an extra 100mm for easy viewing. You’ll need a corridor of at least 800mm as your ‘walk-in’ space.
How do you make a hanging closet rod?
DIY Hanging Closet Rod Step 1: Cut Dowel to Desired Length. You can have it cut at the hardware store or use a miter box and saw) Step 2: Install Eye Hooks. Drill pilot holes and put in eye screws at each end of the dowel (these will be used to hang the dowel). Step 3: Attach Chain. Step 4: Hang Your Stuff!.
How do you fix a shelf that fell out of the wall?
Use screws into one stud and use anchors for the other support(s). This will stabilize the shelf quite a bit compared to anchors alone. Mount a strip of wood horizontally into 2 studs and then use wood screws to attach the shelf supports to the wood. This will also normally be quite strong.
