Table of Contents
Where should closet rod brackets be placed?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How do you install closet rods on drywall?
To securely install a closet rod in drywall: Measure the size of the space where the closet rod will go. Buy a closet dowel rod and cut it to length. Choose a wall bracket that can be positioned so that you can screw it into wall studs. Mark the place where your first bracket will be installed. Drill pilot holes.
How do you hang a closet rod from the ceiling?
Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.
How far should closet rod be from back wall?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How much space do you need between closet rods?
Standard rod height for a single closet rod is 60 inches, a height that leaves ample hanging space for floor-length dresses. When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods.
How far should closet rod be from shelf?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How do you secure a closet rod?
Attach closet rod support brackets at various points along the closet rod. Use a stud finder to locate the studs in either the wall or ceiling. Drill pilot holes, using a drill and drill bit. Alternatively, use self-tapping wood screws and mount the bracket directly into the stud.
Does a closet rod have to go into a stud?
It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
How do you install drywall anchors?
How To: Use Drywall Anchors STEP 1: Choose the right drywall anchor. STEP 2: Twist the self-drilling wall anchor into drywall with moderate pressure. STEP 3: Turn the drywall anchor in until the lip is flush with the wall. STEP 4: Attach your rack or shelf to the wall by screwing into the drywall anchor.
Do closets usually have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
How do you hang a dowel from the ceiling?
Using Bolts as Hangers Simply drill two 1/4-inch holes in a length of dowel and then mark holes the same distance apart in the shelf from which you want to hang the dowel. Drill holes in the shelf and insert carriage bolts. Affix the dowel to the ends of the bolts with 1/4-inch nuts.
What’s the minimum depth for a closet?
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall.
How much space do you need for a hanger?
A hanger is 18 inches wide, the width of an average man’s shoulders, and the garment needs breathing space. Allow 36 inches from the top of a clothing rod to the top of another clothing rod when creating double hanging space.
How do I maximize my closet space?
Instead of cutting your wardrobe in half, use these 19 small closet ideas to create twice as much space as you had before. Get a Clothing Rack. Hide Items Behind Glass Doors. Add Storage Under Clothes. Re-Organize Seasonally. Utilize Modular Shelving. Install Task Lighting. Install Sliding Doors.
What is a dual closet?
A double reach-in closet with deep sides, or a shallow closet with double doors, has a more complex layout and door arrangement than a single-door closet, and it introduces a couple of additional design challenges, according to Organized Living.
How wide does a closet need to be to hang clothes on both sides?
The short answer: If you want hanging clothes on both sides, you need at least a full 6′ wide space. Any less and people will have a really hard time maneuvering in the space.
How do you support a long closet rod?
Reinforce this type of rod by adding a strong wooden dowel through its center, prior to mounting it to the side walls, or you can also add additional external support brackets along the back wall. Maintain the sleek look and feel of the metal rod, while increasing the support for heavy items.
How can I hang more clothes in my closet?
10 Ways to Squeeze a Little Extra Storage Out of a Small Closet Double your available hanging space by adding an extender rod. Store clothes on shelves more efficiently with shelf dividers. Double your shelf space with under shelf baskets. Hooks are your very best friend.
