Table of Contents
How hard is it to install a clawfoot tub?
Clawfoot tubs are difficult to install A traditional clawfoot tub is made of cast iron with a porcelain finish, according to Boston Standard Plumbing. The floor may have to be reinforced before installation of the tub begins because of the tub’s weight (an empty cast iron tub weighs 200 – 400 pounds).
How much does it cost to install a clawfoot tub?
The national average cost range is $2,300 to $4,100 for an installed clawfoot tub. Most homeowners pay $2,850 for an installed cast iron, roll top tub.Clawfoot Tub Installation Cost. Clawfoot Tub Prices National average cost $2,850 Average range $2,300-$4,100 Minimum cost $900 Maximum cost $5,800.
How do you attach a clawfoot tub to the floor?
Place tub in intended position on floor. Mark foot anchoring locations on floor with pencil. Move tub to the side to allow work space. Drill starter holes in floor. Put tub back into position. Place flat washers on lag bolts. Put lag bolts through slot in bottom of foot and screw into floor using wrench or socket.
How far should a clawfoot tub be from the wall?
The distance between your tub and wall should be between 15-18 inches or at least 1 foot.
Does a clawfoot tub add value to a home?
According to the RealEstate.com survey, starter homes with claw-foot tubs sold for nearly 30% more than expected. Coffered ceilings also helped homes sell for 30% more than expected, and farmhouse sinks (thanks Joanna Gaines) helped homes sell for 26% more than expected.
Can I put a clawfoot tub on tile?
You are fine installing a claw-foot iron tub on porcelain tile as long as you place the tub carefully. If you drag the tub across the tile you run the risk of scratching the porcelain if it’s a lower quality.
How heavy is a cast iron clawfoot tub?
All bathtubs are heavy, but clawfoot tubs tend to be especially heavy – particularly the cast-iron models. A cast-iron tub can easily weight 200-400 pounds while empty – fill it with water and climb in and you’re looking at several hundred pounds of weight.
Can my floor support a cast iron tub?
In general, unless there is something wrong with the joist spacing or the wood has rotted, the framing in most houses should be able to support a standard size cast iron tub with no problem. Larger cast iron bathtubs may require more joist or subfloor reinforcement for the tub to be safe to use.
How do you replace a claw in a clawfoot tub?
Follow these steps to replace and old, rusty clawfoot tub drain. Step 1 – Shut Off the Main Water Supply. Step 2 – Disconnect the Tub From the Water Supply. Step 3 – Remove the Overflow Plate. Step 4 – Removing the Overflow Pipe. Step 6 – Taking Away the Old Putty. Step 7- Installing the New Piping.
How do I stop my freestanding tub from moving?
Carefully set the tub in position and adjust the tub feet as necessary until level. Once level, apply a generous bead of silicone on the bottom of the feet. This will prevent the tub from shifting after installation.
Should a freestanding tub move?
Are freestanding baths fixed to the floor? Freestanding tubs are not fixed to the floor unless you want them to be. Most of the time, especially with solid stone bathtubs, gravity takes care of the “moving” issue.
How do I stop my free standing bath from moving?
You can place a bit of silicone sealant under the levelling feet and this will restrict the bath being moved but also means that when it comes to maintenance, unnecessary force has to be used!.
Are freestanding tubs going out of style?
The freestanding bathtub is a current bathroom remodeling trend that may soon be going out of style. Freestanding bathtubs are also very heavy and may require a reinforced floor. Doorless showers. A doorless shower may increase the amount of floor space in your bathroom, but it also creates a problem with humidity.
Can a freestanding tub go against a wall?
While it’s not necessary to tile around a freestanding tub, if the freestanding tub is against a wall, you’ll need to protect the wall from water damage. Tile is not the only option. Alternatives include wainscot, glass brick, and mildew-resistant paint. Wainscoting on wall behind freestanding tub.
How much room do you need around a freestanding tub?
A freestanding bath should have no less than 6 inches of space surrounding all angles of the tub. By following that guideline, you can ensure your freestanding bath has a comfortable access point, and won’t appear cramped in your bathroom regardless of its design.
Is it better to have a tub or shower for resale value?
Generally, a bathtub is seen as more valuable in terms of resale value. This is because bathtubs are seen as more difficult and more expensive to install when compared to showers. The market itself has seen a surge in freestanding bathtubs especially, with their popularity growing over the past 10 years.
Does having a bath tub increase home value?
Having a bathtub and a walk-in shower creates a complete bathroom suite, which is the most appealing setup for potential buyers. For context, having a full five-piece bathroom – double sink, walk-in shower, bathtub and toilet – significantly increases your home’s value.
Does flooring go under tub?
Bathroom floors are notorious for suffering water damage and the area under the bathtub is no exception. Flooring repairs can be intimidating, but the subfloor under the tub generally consists of plywood secured over floor joists and is fairly simple to replace — once you get access to it.
Should you tile before or after fitting bath?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Do you put flooring under a tub?
In new construction, the tub is often installed before the walls, so there is no finished floor underneath! Installing the tub after the floor means also that they have to be more careful in not messing up the soft vinal – scratches, gouges, etc. It could be done either way, but there are risks.
