Table of Contents
What should you put behind tile in a shower?
Install cement board or an equivalent moisture-resistant backing material on walls behind tub and shower enclosures composed of tile or panel assemblies with caulked joints. Don’t use paper-faced backer board, i.e., paper-faced drywall, behind seamed tub and shower enclosures.
What should I put down before installing ceramic tile?
Underlayment is something you put on top of your substrate to prepare it for tiling. The substrate (or subfloor) is the ground, whether it’s made of plywood or cement. Cement board or backer board are the most standard underlayments.
What kind of backer board to use in shower?
Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.
Do you need to seal cement board before tiling?
Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.
Can you tile over tile in a shower?
So, in short, you can tile over tile as long as you’re working on a fairly sound surface. The surface of the existing tile should be free of mold and mildew, completely level (including grout), and without any warping or strangely-placed tiles that might otherwise interfere with a smooth new layer.
Which is better cement board or Ditra?
Ditra is waterproof, while cement board lets water through but won’t be damaged by it. This may make Ditra a better choice if moisture from below is a concern, such as with some outdoor applications or installations over concrete.
Can you use green drywall for shower?
It means “Greenboard” can still be used in bathrooms (and other areas), it just cannot be used as a backer for tile in a shower or tub surround. It can be used in areas not subject to direct water exposure (tub/shower surround), and areas of noncontinuous high humidity (bathrooms).
Can you use drywall behind tile in shower?
The bottom line is that drywall (and this includes moisture resistant drywall) should never be used behind tile in wet areas (showers and tub-shower combinations). This is especially important in a shower located on an outside wall, but also helps even if the shower is on an inside wall.
What is the best adhesive for tiling over tiles?
The best adhesive to use for porcelain tiles is a standard thinset mortar or epoxy tile mortar. Epoxy tile mortar is a bit more difficult to use than a pre-mixed adhesive, but it is worth the extra effort if your room Is very wet with a lot of moisture.
Should you silicone around shower base?
You can use silicone instead (white should not be ugly) to re-do all the chaulking around the shower plate. TIP: to do a nice finish ‘soap’ your finger with some liquid soap and pass it over the silicone. Your fiberglass shower base will slightly flex when you step in.
Should I grout between tile and shower base?
Grout is generally the best choice for filling joints between tiles in showers or elsewhere. Grout in these particular seams is more likely to crack due to settling. Some tile setters fill these seams with matching color caulk because it’s more flexible should movement occur.
Should I caulk over grout in shower?
You do not want to caulk over grout in shower corners. This will result in peeling caulk and an infestation of mold and mildew between the caulk and grout. The best course of action is to remove the old grout in the shower corners and then apply silicone caulk. This will achieve a professional, long-lasting seal.
Does grout sealer make it waterproof?
Sealer soaks into the grout and supposedly makes your tile and grout waterproof. People who want to sell you grout sealer will tell you it keeps it easier to clean, and helps prevent mildew from growing.
Is grout waterproof in showers?
Assuming Grout, Tile, and Sealers Alone Make a Waterproof Shower. Tile and sealed grout is water resistant, but without the proper preparation and installation, water will find its way around them in no time. If you use a shower pan from one manufacturer and waterproofing from another, they may not be compatible.
How thick should cement board be for shower walls?
The minimum recommended thickness for the shower wall is 1/2″ because like some of the other boards, they become far too flexible at thicknesses below 1/2″.
What’s better Hardibacker or durock?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
Can you tile straight onto cement board?
Cement board forms a durable, stable base for tile, and it has no organic materials (unlike drywall, greenboard, or plywood) so it is not prone to mold, rot, shrinkage, or decomposition due to moisture. Ceramic tile laid over cement board is one of the most durable floor or wall surfaces you can install.
What Thinset do I use for cement board?
Spread Mortar Use thin-set mortar when installing cement backerboard. Thin-set dries slowly, allowing you to fix and readjust backerboard sheets as needed. (Thin-set mortar ingredients are cement, fine sand and a water retaining agent. It’s used to bond ceramic or porcelain tile and cement backerboard.).
