Table of Contents
Can I use ceramic logs in my fireplace?
Refractory ceramic gas logs are made of a mixture of cement and ceramic, which allows them to give off more heat than other types. They tend to last longer and are more durable than other options thanks to their ability to withstand very high temperatures. They can be used in both vented and ventless fireplaces.
How do you install fireplace logs?
Take two of the biggest logs and place them parallel with the back of the fireplace on top of the grate. Leave space between them for the flames to reach up over the logs. Take some of the smaller logs and place them perpendicular on top of the bigger logs. Place the kindling on top of the smaller logs in a loose pile.
How do ceramic fireplace logs work?
These logs can be placed in many different types of fireplace spaces. The pipes pump invisible gas through holes in the logs. When the gas logs are ignited, the ceramic logs will produce a steady flame. As propane or natural gas is pumped through the pipes, it burns harmlessly on the surface of the ceramic logs.
How do you replace a ceramic log on a gas fireplace?
How to Replace Gas Logs Turn off the gas. Remove the old logs from the fireplace. Remove the grate. Disconnect the burner and gas line. Clean out your fireplace. Connect the new log set’s gas line to the burner. Secure the burner and grate. Inspect the log set for leaks.
Do ceramic logs radiate heat?
Ceramic logs or lava rock does not radiate any heat.
How do you arrange gas fireplace logs?
How to Arrange Gas Logs Place the largest ceramic logs on the bottom to serve as the foundation for the fire. Leave 2 inches (5 centimeters) between logs. Make sure none of the logs is blocking the gas flow. Arrange smaller logs on top of the foundation logs.
How do you stack wood in a fireplace insert?
First, you place your largest pieces of wood on the bottom of the fireplace—ends at front and back. Next, place 4-5 smaller levels of wood on top until that stack fills about ½ the height of the fireplace. The kindling will be on top, and can begin as sticks, and end with wood shavings and crumbled bits of paper.
Do ceramic logs need to be replaced?
A: In the average home, a well-maintained vented log set with ceramic logs will last 10 or more years. A well-maintained vent-free log set with ceramic logs can also last a long time, but, if heavily used, will begin to wear in 3-5 years.
Why are my ceramic logs turning black?
The most common causes of soot buildup in a gas fireplace are ceramic fire-logs that have been moved out of proper position and burner ports that are clogged. The other main cause of soot is clogged ports on the gas burner, which causes an incomplete or unbalanced burn and formation of soot on the logs and doors.
How long do gas fireplace inserts last?
As with most things, how long your fireplace insert lasts will depend on how well you take care of it. However, when properly maintained, a fireplace insert can last 20-30 years or more, making them a great investment in the future of your home.
Do you need to replace gas fire coals?
Sometimes it’s necessary to change gas fire coals, ceramic logs or pebbles as they become discoloured or worn. Gas fire manufacturers will normally insist on their specific brand of coals to be used on their gas fires claiming it is unsafe or reduces the heat efficiency of the fire.
Do fire logs give off heat?
However, firelogs don’t produce as much of one of the most beneficial byproducts of burning wood: heat. The site Science 2.0 explains that the heat content of standard white oak cordwood is about 6,983 BTU per pound, and a 5-pound firelog’s heat content runs from 12,000 to about 14,000 BTU per pound.
Do you get any heat from vented gas logs?
A vented gas log must be used in a regular fireplace, designed to burn a wood fire. Some vented gas logs will give up to 25,000 BTU’s of heat but most don’t give hardly any heat.
Do gas logs give off any heat?
Gas logs have a gas burner and they come in vent-free and vented options. While they will emit some heat, they do not discharge as much heat as a built-in gas fireplace or gas insert. Most of the heat that is generated from a gas log set goes right up your chimney – just like a wood burning fireplace.
How many logs should I put in my fireplace?
Around 2 to 3 logs should be used when building a fire the conventional way, but more or less can be used depending on the size of you fireplace, the size of the fire you’re building and the size of the logs.
How do you keep a fire going all night in a fireplace?
11 Ways To Keep A Fire Going In An Open Fireplace Ensure That The Damper Is Fully Open. Warm The Chimney. Maintain The Air Supply. Build The Fire Correctly. Only Burn Wood That Is Dry Enough. Burn Room Temperature Wood. Burn Hardwood Logs. Add A Couple of Logs At A Time.
How do I arrange my gas fire coals?
‘The coals must not be crammed together, or inserted into the holes in the matrix. A well laid out, generously spaced coal layout will give the best results. When lit the flames should not be hitting the sides of the firebox, if so adjust as necessary. No coals should be directly above a flame port.
How can I make my gas fireplace look better?
Towards a gas fireplace that looks like a ‘real’ fireplace Step 1 | Install the burner bed on andirons with a grate or in a fire basket. Step 2 | Invest in beautiful ceramic logs. Step 3 | Place a fireback against the back wall of the fireplace. Step 4 | Place antique fireplace accessories around the fireplace.
Can you put too much wood in a fireplace?
Stuffing your fireplace or woodstove with too much wood will likely lead you to damp down the fire, which may cause smoldering and inefficient burning. Some woodstove owners try to achieve overnight burns by closing the damper in their woodstove. Without enough oxygen the fire will generate too much smoke.
