Table of Contents
What is a spindle extender?
Spindle Extenders to extend wall spindle by 15mm to allow for proper tapware installation.
Do ceramic spindles need washers?
Absolutely not. In fact, the vast majority of bathroom taps these days are created using ceramic disc cartridges. Only very few, usually traditionally-styled, taps still use those dastardly compression washers that bring a shiver to our spinesJun 18, 2013.
How does a tap spindle work?
How a water tap works. The flow of water is controlled by turning or moving the tap handle which is connected to the spindle. When moved, the spindle causes the tap valve to move upwards or downwards, causing the water chamber to open or close.
What are spindles?
Spindle fibers form a protein structure that divides the genetic material in a cell. The spindle is necessary to equally divide the chromosomes in a parental cell into two daughter cells during both types of nuclear division: mitosis and meiosis. During mitosis, the spindle fibers are called the mitotic spindle.
Are all tap spindles the same?
There are only two types of spindle tapware. You have one which has tap washers and the other which has a ceramic disc (known as quarter turn taps). If you have a leaking spindle tap, it is usually a fairly easy job to rectify.
Do ceramic cartridges have washers?
Nowadays, the vast majority of modern bathroom taps use ceramic disc cartridges instead of rubber washers. In simple terms, this means no (or at least far fewer) leaks, and only a 90-degree rotation to turn the tap on or off.
Are ceramic tap spindles better?
The reason many opt for ceramic disc spindles is because: They are more durable and longer wearing, saving the inconvenience and expense at having to replace washers. Less wear and tear on the tap as there is no constant turning to get a good flow of water.
Can you convert taps to ceramic?
Answer. Yes, it is straight forward to change a ceramic cartridge and full fitting instructions will be provided with your purchase.
When should I change my tap spindle?
If you get water flowing or oozing out between the tap body and spindle or out from under the cover plate when the tap is turned on, it’s most likely the O-ring that needs to be replaced. Either way, the tap will need to be dismantled, so it’s worth replacing both while you’re at it.
How do you remove wall spindles?
Normally spindles are just toenailed in so you can pull them out with a little effort. Ours were pretty easy to get out. Use wood putty, drywall compound or spackle and a sanding block to smooth out all the surfaces: You’ll want to fill in any holes in the wood ledge with wood putty.
Is it easy to replace staircase spindles?
Are you looking for a simple project with big impact? Replacing wood stair balusters with metal balusters is the project for you. It’s pretty simple, requires minimal tools, and makes a bigger difference than you’d expect.
How much does it cost to replace a spindle?
The price, including labor, to replace a full set of spindles can range anywhere from $1,200 to $1,600.
Can you replace stair spindles?
There are really just three steps involved in replacing a broken spindle: remove the old one, find a replacement, and fit it in. These tips will help the process go smoothly.
Where is the O ring in a shower head?
The O-ring, a circular rubber part of the fixture, is inside the showerhead. It attaches to the various threads when the head has been unscrewed. When this part of the showerhead breaks, it can cause leaks and may need to be replaced.
What are spindles used for?
A spindle is a straight spike usually made from wood used for spinning, twisting fibers such as wool, flax, hemp, cotton into yarn.
What are spindles in a house?
Balusters are the closely spaced supports used to hold up a waist-high handrail, safely containing people inside a staircase or patio deck. They are practical and decorative, providing style and support to the rail system. Balusters are attached to either the floor or secondary support called a base rail.
What is a spindle in science?
a spindle-shaped structure, composed of microtubules, that forms near the cell nucleus during mitosis or meiosis and, as it divides, draws the chromosomes to opposite poles of the cell.
What size are tap spindles?
8.5 is the most common size, suiting most new 1/2″ tap spindles.
What size is a standard tap fitting in Australia?
Brass Tap – 1/2″ Male Inlet and 3/4″ Outlet This is the standard brass garden tap used in all states of Australia except NSW. For NSW use the 3/4″ x 1″ brass tap.
What size thread are basin taps?
Basin taps Bath taps look very similar, except they have a 22mm thread and may be joined together as a mixer.
What is thread extension?
Thread is the AI-powered assistant for Sales teams. Thread is a smart assistant app that helps sales teams work more effectively together.
What are tap connectors?
Tap connectors are used to connect hot and cold taps and come in metal or plastic options. They are designed to be quick and easy to use and range from versions suitable for regular household use to more robust, heavy-duty options for commercial systems.
What are ceramic washers?
In stock fully dense Alumina Oxide and Zirconia Oxide ceramic washers is the most widely used advanced ceramic material. It offers very good performance in terms of wear resistance, corrosion resistance and strength at a reasonable price. Its high dielectric properties are beneficial in electronic products.
Why do ceramic disc taps leak?
Ceramic disc taps feature a cartridge within the tap that contain a pair of ceramic discs. If you do experience dripping this is usually caused by a scratched ceramic disc. In order to rectify the leak you must replace the entire cartridge as follows.
Do modern mixer taps have washers?
Some modern mixer taps (including monobloc taps) operate with ceramic discs instead of rubber washers, which are hidden inside cartridges within the tap. There is one cartridge for hot water and another for cold water.
Are ceramic tap valves better?
Plumbing connections for ceramic disc are no different to other taps, and with that comes all the ease of a quarter-turn technology, and a more durable, longer lasting tap without those annoying leaks. From a long-term maintenance point of view, ceramic disc taps are much better than normal taps.
