Table of Contents
What goes behind cement board in shower?
Unless specifically manufactured as a waterproof product, cement board is water resistant but not waterproof. You must coat it with a fluid-applied waterproofing or apply a water-resistant barrier behind it that drains (BSC 2009b).
Do I need to waterproof cement board in shower?
Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.
How thick should cement board be for shower walls?
Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed when spanning the studs and it provides a solid base for the tile.
Does cement board need to be waterproofed?
Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.
Do you need put plastic behind cement board shower?
plastic behind cement board with waterproofing is essentially suspenders when you already have a belt. the waterproofing is also a vapor retarder so if the red guard or kerdi product is continuous, lapping corners and all, the plastic will be unnecessary.
Do you need to use RedGard over cement board?
You really don’t need the RedGard, but the more protection the betterso go for it. And yes, you can do the boards beforehand. But, hit the filled seams & screws (your weak points) as soon as a panel is ready to give it some time to setup.
Which is better cement board or Ditra?
Ditra is waterproof, while cement board lets water through but won’t be damaged by it. This may make Ditra a better choice if moisture from below is a concern, such as with some outdoor applications or installations over concrete. This difference, Ditra fans would argue, makes it more resistant to movement.
Which is better cement board or Hardibacker?
Durock is a reliable cement product that contains glass mesh. It is the heavier of the two materials, which means it is more difficult to use and maneuver. HardieBacker is much more light, and it is also the best selling brand of cement board available. It is much cleaner because it does not have any glass in it.
What thinset do I use for cement board?
An unmodified thinset (Masterblend) is fine between the Hardi and the subfloor. The reason for the layer of thinset between the cement board and the subfloor is to fill the voids/gaps between the two. It’ll keep the cement board from moving up and down.
Do you need thinset under cement board?
Using thinset under cement board is a commonly skipped step amongst many contractors. However, many manufacturers including, both Durock and Hardiebacker not only recommend that you use thinset under their backerboard, but they specify it and will void the warranty on their product if it’s not used.
How do you fasten cement board?
Drill a small hole in one end of a scrap of wood, attach it to the cement board at the center of the circle, screwing through the cement board into the work surface below. Then screw in a “cutter” screw where you want the circle to be scored, for example, 2 in. from the center for a 4-in. hole.
Can you shower with just cement board?
Cement boards can be used in a shower because they can be exposed to water and moisture without warping, rotting, and deteriorating. It also does not promote the growth of molds and mildew. Cement boards are also a good substrate to use for tiles, which are commonly installed in showers as well.
Should you tape cement board joints?
The thinset and mesh tape are to strengthen the seams. If you are going to tile over the cement board, you should tape the seams. This should not be that difficult.
Does backer board go over shower pan lip?
The best approach when installing cement board or other tile backer around a tub is to keep the cement board out of the lip area. above the lip of the tub. Then apply a generous amount of thin-set to the bottom bathtub tile and position it 1/8 in.
Do you need a moisture barrier behind shower walls?
No matter how watertight you think your shower is, moisture in the form of water vapor may still get in. They are required beneath your shower pan and behind your shower walls. Moisture barriers can be made of polyethylene or a membrane that is rolled directly onto the drywall.
Does shower pan liner go behind backer board?
The wallboard must be installed 1/8 inch above the shower pan. If the shower pan is not in place, the wallboard height must be guessed, which can lead to inaccuracies and an expansion gap that is too large or too small.
