Table of Contents
Can you put a toilet flange over tile?
Yes, the toilet flange should be seated over the tile so that it can be secured tightly through the bolts. The usual method followed is to place the flange on the tile and its bottom is touching the tile. You then fix the flange with the screws ensuring they go below the thickness of the tile.
Should toilet flange be flush with tile floor?
The bottom of the flange must be flush with the tile, no gaps, or it could end up too high. You don’t want a large wax depth from having it too low and if it is too high, the toilet will rock. The seal is engineered to work best with the flange on top of the finished floor.
How do you secure a toilet flange to a concrete floor?
Use Tapcon anchors or a similar type of masonry/concrete screw to fasten the toilet flange to the concrete slab. If using a plastic flange ring, be careful not to crack the ring by screwing the anchors in too far. With the toilet flange in place, you are ready to install the toilet with a new wax ring.
Is toilet flange supposed to be level with floor?
When you install your toilet flange, it should be installed on top of the finished floor, and it should also be installed perfectly level. If your flange sits even or below the floor, then it’s wrong. These rings will prevent the toilet from properly recessing into the flange. Instead, use a standard ¾ inch wax ring.
Do you have to glue a toilet flange?
If the pipe has a 4-inch inside diameter: This toilet flange is designed to glue on the inside of the pipe or expand inside the pipe. Leave the old toilet flange right in place and glue on the new one at the right elevation for the floor, if it’s plastic.
Is it better to tile under or around a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet. 2. It is also easier to do this rather than trying to cut tiles around the toilet.
Do you tile around or under toilet?
To install tile properly around the toilet, you need to affix it to the floor under the fixture. Because toilets sit on top of tile, any rough cuts are hidden, making it easy to achieve the appearance of tile that has been custom-cut for your bathroom.
How close should tile be to toilet flange?
When you’re tiling around an already-installed toilet, plan out your pattern so that at there is at least 2 in (5.1 cm) of space between the base of the toilet and the edges of any of the tiles you’ll be laying around it.
How far above tile should toilet flange be?
Check the Flange Height The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.
Can toilet flange be lower than floor?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
Does a toilet need to be level?
2 Answers. There are purists out there that may say it must be level, but if it looks good setting there, I would let it set on the floor with no shims. It should not affect the operation of the flapper or valve that flushes the toilet.
What if my toilet flange is too high?
When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.
Should you silicone a toilet flange?
Caulk prevents a fouling area. If mop water, bathtub water, or a less pleasant “bathroom liquid” gets underneath the toilet, there is no way to clean it up. Caulking around the base of the toilet will prevent this from happening.
Is it okay to tile around a toilet?
Tiling around a toilet to save a few dollars in labor will leave you with an unprofessional installation, and your guests will notice. It is almost impossible to cut flooring, especially ceramic tile or wood, precise enough to fit snugly around a toilet base.
Do you put flooring down before toilet?
If you’re installing a new floor, pedestal sink, and toilet, you should install the laminate flooring first so it’s under the sink and toilet. By installing the flooring first, you will also be able to more easily switch up cabinetry or fixtures, without having gaps in the flooring.
Do you tile walls before or after fitting a bathroom?
Why You Should Tile the Floor First The tile installation principle is that the tiled wall ‘hangs’ over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be ‘sitting’ on the bathroom floor.
Do you lay vinyl tile under toilet?
It’s considered best practice to always put a toilet on top of the flooring, whether the floor is made of wood, vinyl, tiles, etc. Not only will placing the toilet on top of the vinyl plank flooring generally look better, but it also ensures that the weight of the toilet is held by the floor and not the pipes.