Table of Contents
Is it hard to install a over the range microwave?
Installing an over-the-range microwave oven is often easier than you think. If you are simply replacing an existing vent hood or older microwave with a new oven, you can install it easily enough with common tools. Attach the ductwork and plug in the oven, and you’re done.
How do you install an over the range microwave?
Project Toolbar Install a Vent for the Microwave. Install an Outlet Inside the Cabinet. Position the Microwave Fan. Tape Up the Mounting Template. Attach the Microwave’s Mounting Plate. Hang the Microwave Over the Range. Bolt the Microwave in Place.
Does over the range microwave need to be vented?
There is no requirement that your Over The Range (OTR) Microwave be vented to the outdoors. All OTR microwave ovens can be set up to either allow the fan to recirculate the air back into the kitchen or be vented to the outdoors.
How much does it cost to have an over the range microwave installed?
Over-the-range microwave installation costs $100 to $300 for a standard replacement. The average cost of built-in microwave installation is $220 to $580. A handyman or electrician charges $50 to $100 per hour for labor. A new microwave costs $100 to $600.Microwave installation cost. National average cost $150 Average range $100 to $400.
What kind of outlet do I need for an over the range microwave?
Our countertop and over-the-range microwaves: Require a 120 volt individual, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 amp circuit breaker or time-delay fuse. Over-the-range models should be on a dedicated circuit.
Does over range microwave need dedicated circuit?
Microwave ovens often demand dedicated circuitry, but this isn’t always a necessity. The National Electrical Code requires it for all fixed equipment, so a circuit must be set aside for any built-in oven. Generally, any equipment that runs on 220-volt power must have its own circuit.
Can you reuse microwave mounting brackets?
If your new microwave is the same brand as the old one, you may be able to reuse the existing mounting bracket.
How do you mount a microwave on a tile wall?
How to Install Microwave Brackets Around a Tile Backsplash Locate the wall studs behind the tile. Measure the wall space over the stove, usually between two low cabinets, and find the center. Place a 5/8-inch carbide-tipped masonry drill bit into your drill. Change the bit to a 3/16-inch carbide bit.
How do you install an over the range microwave without a wall?
When you don’t have a back wall or don’t want to install the microwave beneath a cabinet, add a removable shelf to the top of the countertop and place the microwave on it instead.
How do I know if my microwave is self venting?
You can tell if it’s the case by going outside and looking at the wall to see if there’s a wall cap. This allows the escape or exit of vented air from the kitchen.
Do microwave vents do anything?
Vented microwave hoods are much more efficient at removing contaminants from your kitchen air. Although a vented microwave is more efficient than a recirculating one, a professional-quality range hood cleans your air even more efficiently and it’s also more versatile and powerful.
How do I know if my microwave vents are outside?
Lower the front of the microwave and have a look over the top, under the cabinet. The unit will be supported at the lower rear by a bracket flange. Your microwave’s vent either exhausts upward or rearward, but from right at the top rear of the unit. You’ll be able to see whether there’s a duct opening at that location.
Do all over range microwaves Mount same?
All mounting kits are not the same. They are specifically designed by the manufacturer for the model. Mounting kits are provided when you purchase the above range microwave or you can purchase one separately. The kits must vary in their configuration to properly accommodate hanging the microwave securely.
Is there a standard size for over-the-range microwaves?
Over-the-range microwaves Widths will usually be roughly 30″ to match the standard width of the range below and the standard cabinet width where the microwave will be mounted. Most over-the-range microwaves are roughly 17″ tall. Closed door depths can range from 15″ to 18″.
Do microwaves need a special outlet?
You can plug a microwave into any outlet. The appliance doesn’t require a special receptacle. It doesn’t need GFCI protection either. Though, AFCI protection is recommended.
Can an outlet be inside a cabinet?
Outlets are an important part of kitchen design, whether on a wall or in an outlet box for cabinets. If there isn’t any more space available on kitchen walls, or you want to avoid making holes in a finished wall that will require drywall repairs, you can install an outlet into a cabinet wall.
Does microwave need 20 amp outlet?
The microwave oven needs a dedicated 20-amp, the 120/125-volt circuit to feed it. This will require 12/2 NM wire with a ground. Microwave ovens come in different varieties and sizes. Some are countertop models, and other microwaves mount above the stove.
Can I use an extension cord for my microwave?
We strongly recommend that an extension cord not be used with a microwave due to potential safety hazards under certain conditions. Your microwave should be plugged into its own properly grounded, dedicated electrical outlet to prevent the flickering of the lights, blowing of a fuse or tripping of a circuit breaker.
Does a microwave need a GFCI?
A GFI or GFCI outlet is needed if the microwave is located less than 6 feet from a water source such as the edge of the sink, toilet, shower, etc. It is also needed if located outdoors, garages, kitchen counter tops, near laundry, utility sinks, wet bar sinks and near swimming pools.
