Table of Contents
How is a fireplace mantel attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. In this case any screws or nails may be located on top or beneath the mantel.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How thick should mantle be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth. First, use a measuring tape and pencil to measure and mark the mantel top to size.
How do you hang a heavy mantel on brick?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
Can you drill into stone fireplace?
All in all, drilling to masonry is completely achievable for a do it yourself-er. I definitely think drilling into brick/stone is easier than concrete but you can do it!Sep 28, 2021.
How do you secure a floating mantel?
Make sure those marks are level, centered and extend far enough to cover the mantel’s length. drill holes at each mark. Drill Sleeve Holes. Drill holes at each mark using a drill and 3/4″ masonry bit. insert lead sleeves into holes. Insert Sleeves. drive lag bolts. Drive Lag Bolts. install the mantle. Install Mantel.
How high above a fireplace should a mantle be?
Mantel Height: We recommend installing the mantel 4.5′ from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
How wide are most fireplace mantels?
For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches. The mantel should not be so wide that it reaches anything else, like a wall, window or door.
How far should a mantel extend from the fireplace?
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.
Should a fireplace mantel be wider than the fireplace?
Your mantel should be wider than your fireplace. Typically, a mantel should be a minimum of 3 inches past the firebox on each side. However, more can be better. The average mantel is approximately 6 inches wider than the fireplace on either side, and some can be even wider.
How far above the mantle should a TV be mounted?
The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.
How high is too high for a mantel?
A mantel that is at least 12 inches above the opening of the fireplace should be high enough away from the flames to keep you, your family, and your house safe.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
Can you use timber for a fireplace mantel?
This reclaimed barn beam would be a true rustic fireplace mantel in your home or business. All mantels are surface washed and kiln dried, and have a variety of finish options and customizations to choose from. These solid wood timbers are cut to your specified length and finished with your preferred shade of finish.
Does Pine make a good mantel?
Woods to Avoid for a Fireplace Mantel Not all woods are suitable for fireplace mantel shelves. Softer woods like fir and pine look attractive when they have been sanded down and polished, but are known to crack easily with the passing of time.
Should I drill into brick or mortar?
We recommend drilling into the mortar instead of the brick for a few reasons. Drilling directly into brick is more difficult than drilling into mortar and runs the risk of damaging the brick. It is also easier to repair mortar if you drill into the wrong location or decide to remove your decorative item.
What is the best way to drill into brick?
Begin by drilling a pilot hole using a small masonry bit. Then, attach the larger bit and drill again to make a bigger hole. Make sure the drill is perpendicular to the brick wall. Drilling through brick and mortar places stress on the drill, causing it to heat up.
