Table of Contents
How do you install a chair rail without a nail gun?
How To Install Chair Rail Without A Nail Gun: 5 Easy Steps Step #1. Measure your space. Step #2. Cut the molding. Step #3. Drill into the studs of your wall. Step #4. Fasten your molding. Step #5. Do the finishing touches.
Where should chair rail be placed on the wall?
Most experts place chair rails at one-third the distance of the ceiling height. For a standard 8-foot ceiling, they should be installed about 32 inches from the floor. Hull cautions that most people install chair rails too high on their walls.
What kind of nails do you use for chair rail?
Use a pneumatic nailer or hammer with 2-1/2 inch finishing nails to attach the chair rail to the wall (image 6). Insert the nails through the thick parts of the molding to prevent the wood from splitting.
Which side of chair rail goes up?
There is no right or wrong orientation for a chair rail unless the shape is very obviously intended to have a shelf along the top. It’s a design feature that you can fit to express your own likes and room design.
Can you put chair rail on only one wall?
A chair rail, also known as a dado rail, is a horizontal piece of trim that usually runs the perimeter of a room approx 36″ from the floor, but can also be awkwardly placed on a single wall (popular in the ’90s).
What height should chair rail be?
As a general rule of thumb, the best height for most walls sits around one-third the distance up the wall from the floor. So, in an eight-foot-tall room, you’d want to hang your chair rail moulding at around 32 inches from the ground. Other experts say that around 25% of the wall’s height is a better placement.
Is chair rail out of style 2020?
Chair rails are still used today to create a more formal and traditional design. If that’s the look your sister wants, chair rails would be a good choice.
Can I use baseboard as chair rail?
It is easier to trim a little extra than to replace missing material. Molding for chair rails may not always be sold as such. If you think molding of a particular shape would look good as a chair rail, use it, even if it is labeled for use as a baseboard.
Does chair rail have to match baseboards?
Like many creative pursuits, interior design has guidelines, but no hard and fast rules. The typical trend is to match your chair rail and baseboard colors, but playing with this trend the right way can also make a dramatic visual statement.
Do you caulk chair rail?
As with any woodwork, chair rails require a certain amount of maintenance. Most moldings are attached using nothing but nails and over time can become loose. Using caulk to seal the seams of chair rails can give them just the extra bit of flex they need to maintain their position for years to come.
Do you have to cope chair rail?
Chair rail is a type of molding. When two pieces of chair rail molding meet at 90-degree angles, it’s customary to cope one of them. Coping is precisely cutting one piece of molding along its profile to provide a clean, over another piece of molding at a corner.
What can you use instead of chair rail?
Chair Rail Alternatives Ribbon. Use ribbon as a chair rail alternative by adhering it with a thin coating of wallpaper glue. Paint Shades and Patterns. Fabric. Vinyl Appliqués. Decorative Buttons.
Does chair rail add value?
Value! Of all the home improvements you can make, chair rail is one of the least demanding in terms of cost and labor. Studies have shown that installing moldings (like crown or chair rail) can have a positive impact on the selling price of a home.
What’s the difference between chair rail and wainscoting?
Wainscoting is usually a complete piece of paneling (usually wood). Panel molding reaches above the chair rail (typical chair rail height is approximately 32″ above the floor) and sometimes covers the entire wall.
How much does it cost to have chair rail installed?
The national average materials cost to install chair rail molding is $1.29 per linear foot, with a range between $1.03 to $1.55. The total price for labor and materials per linear foot is $6.81, coming in between $5.32 to $8.29. A typical 125 linear foot project costs $850.71, with a range of $665.48 to $1,035.95.
Can you put a chair rail in a bedroom?
Simply install a chair rail in the bedroom and you’re on your way. Bedroom chair rail molding is inexpensive and easy to install, and provides an opportunity to introduce a second paint color, wallpaper, or beadboard above or below the molding, as these bedroom chair rail ideas demonstrate beautifully.
Does the darker color go above or below the chair rail?
“A lighter wall color is better below the chair rail if the furniture is dark. If the furniture is lighter in value, the wall color below the chair rail can be darker.”.
What is chair rail molding used for?
Chair rail is a type of moulding that is used in the middle of a wall. Originally, chair rail moulding was added to dining rooms to protect plaster walls from getting damaged by dining room chairs. These days, chair rail moulding isn’t just about adding protection to vulnerable walls.
What height should wainscoting be?
What is the proper height for wainscoting? Generally, the cap sits about one-third the way up the wall. So if the ceiling is 9 feet, go for 3-foot wainscoting. For taller wainscoting, such as one with a plate rail, cap it two-thirds the way up the wall.
How do you stop wainscoting in the middle of the wall?
The easiest way to finish the ends would be to use a length of Cap Trim. The cap must be mitred to create a 90 degree angle. It then will run down the side of the stile to the floor as shown in the image. Making a Return using the Top Rail is the best method of finishing wainscoting mid-way on a wall.
