Table of Contents
Can you mount any projector to the ceiling?
A projector is a great way to boost the quality of your home theatre, giving you bigger images for that movie theater feel. Mounting your projector on your ceiling or wall will help give your home theatre a polished, professional look — not to mention it saves space.
How do you hide the wires from a ceiling mounted projector?
How to Hide Projector Wires 1 Cover the wires with cable tunnels. 2 Tuck the wires behind crown molding. 3 Run the wires down a window frame. 4 Hang soundproofing material to cover the wires. 5 Sneak wires behind your couch and other furniture. 6 Run the wires through the ceiling and wall.
How do you power a projector from the ceiling?
How to Run Power to a Ceiling Mounted Projector Scope and Install a power outlet in the attic. Run the projector power cable to the outlet. Turn on and test.
How do you mount a projector on the ceiling without studs?
If you don’t have access to the space above, your best bet is to install a section of plywood below the drywall. Make it large enough to span two joists. Finish the edges in a way that is appropriate for your style and make it into an inverted “pedestal” to hang the projector from.
How far from the ceiling should I mount my projector?
We recommend that the bottom of the screen be between 24” and 36” inches off the floor. If you have multiple rows of seating, you may need to go a bit higher to keep clean sight-lines for people sitting behind the first row.
What wires do I need for projector?
Just the single HDMI cable should be enough to get video to your projector, with no need for back-up cabling or other additional work.
How do you hide a projector from the ceiling?
Methods of Concealing the screen Coffered Ceiling. One of the most popular ways to hide a projector screen is in a coffered/tray ceiling. Flush Ceiling. Box in with Coving.
How much weight can be hung from ceiling drywall?
Ceilings are another matter, though, thanks to the direct downward pull of gravity. The average 2×4 ceiling joists can’t safely hold more than around 15 to 20 pounds regardless of the hanging hardware you use. A 5-inch flower pot with the combined weight of soil, water, and a plant can easily reach that weight.
How much weight can a drywall anchor hold in a ceiling?
Able to hold between five and 25 pounds, depending on brand and size (larger anchors hold more weight). Not suitable for use on ceiling drywall as downward pressure could cause the anchor to slip out.
How much weight can a ceiling hook hold?
In most cases though, for anything above 5 pounds, any hook that screws into a wall or ceiling stud is the recommended hook to use. For weights below 5 pounds, an adhesive hook will do the job.
Should I mount my projector on the ceiling?
If you shelf-mount your projector, you’ll have lower installation costs and convenient access to power outlets. However, a ceiling-mounted projector at home keeps it out the way of people walking past, and allows you to install it closer to the screen. Power outlets will be closer which means less cabling is required.
How high should a projector screen be off the floor?
The bottom of the screen should be approximately 40-48″ above the floor in a room with a level floor and several rows of seats. Evaluate any barriers, and try to make sure that the lower part of the screen will be visible from all seats.
How far back should a projector be from the screen?
Ideally, you should use your projector’s manual or manufacturer’s website to calculate the best distance from the screen for your particular projector. A good rule of thumb for a 100-inch screen is to have your projector between 122 and 133 inches or around 10.5ft.
Can you splice wires behind drywall?
And the splice can only be concealed when it is part of a NM cable fished behind a wall or floor. The device is never permitted in an open stud space where drywall will later cover it during the finishing phase of a remodel, regardless of the Code cycle.
Can I leave ceiling wires exposed?
Yes. This is not only safe but best practice. Tuck the capped wires completely into the junction boxes to avoid accidentally snagging on passing ladders, wallboard, etc. If the room continues in general use then install blank cover plates.
Is surface wiring legal?
It is important to realize that surface wiring is only an acceptable practice indoors, and poses many safety concerns when implemented outside.
Can you use an extension cord on a projector?
There is no problem using a extension cord of high quality to power up a 200-300 watt projector.
How do you place a projector in a room?
Stuff it in a Custom-Made Soffit. This is a popular go-to solution of home theater designers. Build a Wall Around It. Stow it Behind the Wall. Hide it Behind the Screen. Put it in a Cabinet, Place it On a Shelf. Tuck it Above the Ceiling. Consider a Short Throw Projector.
How do you hide a wall mounted projector?
Method 1: Use cord covers A cord cover is a simple piece of plastic or metal that attaches directly to your wall or ceiling. You can either buy one that matches your décor or paint it the same color as the wall. Even if you leave it a different color, though, it has a much neater look than a tangle of cords.
Can you screw into drywall without an anchor?
Simple Answer: NO – A screw directly into drywall will not hold. You need to use some type of picture hanging hardware to hang a heavy picture securely. The threads of a screw into only drywall, without an anchor, will NOT permanently hold in the drywall. It will just pull right back out sooner or later.
How much weight can drywall hold without stud?
How much weight can drywall hold without a stud? Typically around 20 pounds. For heavy items, you may need to double up or hang from a stud. With a cheap plastic wall anchor, like the ones most products include in the box, drywall can hold about 20 pounds.
