Table of Contents
How do I install a BLTouch?
How to install BL-Touch on the Ender 3 V2 3D Printer (No Adapter Board Version) Step 1: Access your printer’s motherboard. Step 2: Remove z-axis limit switch. Step 3: Connect and thread BL-Touch cable. Step 4: Mount the BL-Touch on the Nozzle Assembly. Step 5: Update Motherboard Firmware. Step 6: Determine and Set Z-offset.
How far should the nozzle be from the bed ender 3?
How to actually level bed on your Ender 3 with a piece of paper. Ideally, you want a squished, but not too squished layer. A tried-and-true technique is to have around a . 1mm gap between the nozzle and the bed to get the ever-so-perfect first layer.
Where do you mount a BLTouch?
The mount needs to be adjustable so that the distance between the bottom of the sensor (not the pin) needs to be 8.3mm above the tip of the nozzle. The sensor should also be at least 15mm away from the hot bits. The BLTouch needs changes made to the configuration.
How do I know if my BLTouch is working?
How can I tell if BLTouch is triggering? During startup: BLTouch extends and retracts several times. In the LCD menu for BLTouch; select CMD:Self Test : BLTouch turns red, extends and retracts several times. In the LCD menu for BLTouch; select CMD:Extend : BLTouch extends.
What does a BLTouch do?
BL-Touch is a smart auto leveling sensor for 3D printers based on open source, which can precisely measure and adjust the distance between the build plate and printer nozzle in a simple and easy way. Automatic leveling achieves via the collaboration between the BL-touch device and its firmware.
What happens if nozzle is too close to bed?
If the nozzle is too close to the surface of the printing bed, there will not be enough space for plastic to exit the extruder. For example, if you enter a value of 0.05 mm for the Z axis Offset G-Code, this move 0.05mm nozzle further away from the print bed.
Does Ender 3 Pro have auto bed leveling?
Coming with everything you need, the BLTouch is by far the most popular auto-bed leveling solution for the line of Ender 3s. The BLTouch utilizes a physical push-pin that detects the build platform. In conjunction with an in-built Hall sensor, the device then signals to the printhead that it’s reached the lowest point.
How often should you level a 3D printer bed?
You can get away with leveling the bed every 5-10 prints depending on how stable the bed is and how careful you are when removing the finished prints from the surface. In order to stay on the safe side, it is advisable to level the bed before a large print (15 hours or longer) to ensure that it doesn’t fail mid-print.
How accurate is BLTouch?
The BLTouch is a sensor for automatic print bed leveling. A Hall sensor is triggered by an electromagnetic field as soon as the sensor pin moves back into the housing by touching the print bed. It is extremely accurate with a repeatability of about 0.001 mm.
How much can BLTouch compensate?
BLTouch is an auto leveling sensor that can precisely measure the tilt of the print surface so that your printer can compensate as small as 0.01mm* difference.
How do you fix a BLTouch?
BLTouch Troubleshooting Avoid Clones. This guide assumes you are using a genuine BLTouch from Antclabs. Double Check Your Wiring. * Cut the Trace. Note that BLTouch V3+ no longer has a trace and is not needed to work with the Duet. Use the Resistor. Test the Probe First. Upgrade the Firmware. Use Probe Type 9.
What is BLTouch ender 3 V2?
The Ender 3 V2 is Creality’s revamped version of their original Ender 3, with a few notable upgrades, including a new mainboard. This new mainboard is the Creality V4. The new mainboard, however, has specific ports for a Z probe, like a BLTouch, to automatically level the print bed.
Do you need BLTouch?
First of all, BLtouch is not necessary as long as you use a flatbed. So if you have any problems with the leveling, BLtouch is absolutely worth it, especially if your bed is not conducive. If you want to choose bed leveling for your printer, BLtouch is the best option among different models.
Is automatic bed leveling worth it?
Automatic print bed leveling makes it easy to adjust the build surface for 3D printing without having to reconfigure the entire printer. You do not waste time adjusting the printing bed or the height of the Z-axis. Even if you’re new to 3D printing, automatic print bed leveling gives you the easiest experience.
How important is auto level 3D printer?
Arguments for an Auto-Leveling 3D Printer It makes it easier to change the build surface without having to reconfigure your printer. You get high precision regardless of uneven heating or bowed build plate. Sensors ensure the print head is always moving parallel to the build plate.
What is unified bed leveling?
Unified bed leveling (UBL) is a digital leveling system present on Marlin firmware and some of its forks. It’s similar to bilinear leveling but with a few extra features. The main difference between UBL and other ABL systems is that UBL combines features of other leveling techniques to provide users with more control.
Why is my BLtouch always red?
The Bl touch will blink its red LED when it did not successfully complete the self test. The BL touch will run its self test when the printer is first powered up. The self test will push the plunger up and down 2 or 3 times.
How do I update the firmware on my Ender 3?
Download and install the Arduino IDE. Files in Arduino are called “sketches”. Add the U8glib library. Install the Sanguino board. Upload the sketch to your Arduino Uno. Connect the Arduino to your Ender 3. Burn the bootloader. Download and prepare the latest Marlin firmware. Connect and transfer the firmware.
